Chapter 4 | Configuration Using the |
IP Configuration
Management VLAN This
WARNING: The Management VLAN must be set to 1 (default VLAN) if the system IP address (IP Address field) is set to 192.168.1.254. Otherwise, you may not be able to access the system.
IP Address Mode Specifies whether IP functionality is enabled via manual configuration (Static) or Dynamic Host Configuration Protocol (DHCP). Select Static or DHCP from the
IP Address If you are using a static IP address, enter the IP address here. The Switch’s default IP address is
192.168.1.254.
Subnet Mask If you are using a static IP address, enter the subnet mask for the currently configured IP address. The default subnet mask is 255.255.255.0.
Default Gateway If you are using a static IP address, enter the IP address of the default gateway. The default value is 0.0.0.0.
DNS Server If you are using a static IP address, enter the IP address of the DNS server. A second DNS address can be specified in the additional text field provided.
Click Save Settings to save your changes. Click Cancel Changes to cancel your changes.
Setup > Time
The Time screen allows you to configure the time settings for the Switch.
Setup > Time
Local Time
This is where you set the system date and time for the Switch. All values noted as
Hours Enter the
Year Enter the last two digits of the year here (for example, 07 instead of 2007).
Time Zone Select your time zone from the
Daylight Saving
This is where you configure Daylight Saving Time.
Daylight Saving Enable daylight saving time by checking the checkbox.
Time Set Offset Custom daylight saving time is set by entering the time difference in minutes into the Time Set Offset field. The default offset is 60 minutes.
Business Series Smart Gigabit Ethernet Switch | 13 |