American Standard 2772.XXXW installation instructions Xxxw Series Whirlpool/Bathing Pool, Cadet

CADET™ 5' x 42"

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2772.XXXW SERIES

WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

				PROVIDE ACCESS TO PUMP FOR
			SERVICING ON ALL INSTALLATIONS
			1524mm
	305 mm		(60)
235 mm	(12)	RECOMMENDED FITTING LOCATION
			76 X 330mm (3 x 13")
(9-1/4)					ON/OFF
			FOR PIER OR ISLAND
19 mm
(3/4)			INSTALLATIONS ONLY		SWITCH
FINISHED
SEE FITTING WALL
SPECS FOR
DIMENSIONS
		229 mm
		(9)
1067mm		CUTOUT IN FLOOR		PUMP
(42)
533mm		FOR DRAIN
(21)
C/L OF	57 mm	(8) JETS		(2) AIR VALVES	OUTLINE OF CUTOUT
					1486mm x 1029mm
SUPPLIES	(2-1/4)		ALT. FITTING LOCATION
					(58-1/2 X 40-1/2)
	C/L OF DRAIN			C/L OF
				SHOWER ARM
OPTIONAL TO
FINISHED FLOOR				C/L OF
USUALLY BETWEEN
1651 & 1981mm				VALVES
(65 & 78)	C/L OF
				C/L OF
	OVERFLOW		305mm
	38 mm		(12)	SPOUT	■ LEVELING
	(1-1/2)
			102 mm	SAFE-T-HEATER	STRINGER
	76mm
				REMOVABLE	NOT FOR
	(3)		(4)
				BLANK	SUPPORT
	502 mm
	(19-3/4)				464 mm
	ROUGH				(18-1/4)
	FLOOR
	INTEGRAL		1-1/2 N.P.T.M.
	SUPPORT		THREADS	70 mm
	FEET	1-1/2 O.D.TAILPIECE		(2-3/4)
				117 mm
				(4-5/8)

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

•Safe-T-Heater 9075.120*

•Tile Bead Kit 751755-100*

•Apron Kit*

* see your American Standard Distributor

List of Required Components (not included):

• Drain 1583.470*	• Bath Filler*
* see your American	Standard Distributor

GENERAL SPECIFICATIONS FOR 2772 WHIRLPOOL

INSTALLED SIZE

60 x 42 x 19-3/4 In.(1524 x 1067 x 502mm)

WEIGHT

117 Lbs. (53 Kg.)

WEIGHT w/WATER

642 Lbs. (289 Kg.)

GAL. TO OVERFLOW

63 Gal. 239 L.)

MIN. OPERATING GAL.

54 Gal. (204 L.)

BATHING WELL AT SUMP

40 x 26 In. (1016 x 660 mm)

BATHING WELL AT RIM

52 x 32-1/2 In. 1321 x 826 mm)

WATER DEPTH TO OVERFLOW

13-1/4 In. (337 mm)

FLOOR LOADING

37 Lbs./Sq. Ft. (182 Kgs/Sq. m.)

(PROJECTED AREA)

PTS.

27.8

CUBE (FT3)

45.4

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP

1.6 HP, 9.7 AMPS, 120V.

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	15 amp GFI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2005

752501-100 Rev. JAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.