American Standard 2772E SERIES installation instructions Thank YOU

CADET ELITE™ 5' x 42"

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2772E SERIES

WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS

THANK YOU...

			1524mm
	305 mm		(60)
235 mm	(12)	RECOMMENDED FITTING LOCATION
			76 X 330mm (3 x 13")
(9-1/4)
19 mm			FOR PIER OR ISLAND
(3/4)			INSTALLATIONS ONLY
FINISHED
SEE FITTING WALL
SPECS FOR
DIMENSIONS
		229 mm
		(9)
1067mm		CUTOUT IN FLOOR		PUMP
(42)
533mm		FOR DRAIN
(21)
C/L OF	57 mm	(8) JETS		(2) AIR VALVES
SUPPLIES	(2-1/4)		ALT. FITTING LOCATION
	C/L OF DRAIN			C/L OF
				SHOWER ARM
OPTIONAL TO
FINISHED FLOOR				C/L OF
USUALLY BETWEEN
1651 & 1981mm				VALVES
(65 & 78)	C/L OF
				C/L OF
	OVERFLOW		305mm
	38 mm		(12)	SPOUT
	(1-1/2)			IN-LINE HEATER
			102 mm
	76mm
				REMOVABLE
	(3)		(4)
				BLANK

ON/OFF

SWITCH

OUTLINE OF CUTOUT 1486mm x 1029mm (58-1/2 X 40-1/2)

■LEVELING STRINGER NOT FOR SUPPORT

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

•Flex-Jet Pulse Jet Kit*

•Flex-Jet Soft Jet Kit*

•E-Z-Install Heater*

•Tile Bead Kit*

•Apron Kit*

List of Required Components (not included):

• Drain* • Bath Filler*

502 mm
(19-3/4)		464 mm
ROUGH		(18-1/4)
FLOOR
INTEGRAL	1-1/2 N.P.T.M.
SUPPORT	THREADS	70 mm
FEET	1-1/2 O.D.TAILPIECE	(2-3/4)
		117 mm
		(4-5/8)

GENERAL SPECIFICATIONS FOR 2772E WHIRLPOOL

INSTALLED SIZE						60 x 42 x 19-3/4 In.
			(1524mm x 1067mm x 502mm)
WEIGHT							117 Lbs. (53 Kg.)
WEIGHT w/WATER							642 Lbs. (289 Kg.)
GAL. TO OVERFLOW								63 Gal. 239 L.)
MIN. OPERATING GAL.								54 Gal. (204 L.)
BATHING WELL AT SUMP				40 x 26 In. (1016 x 660mm)
BATHING WELL AT RIM			52 x 32-1/2 In. 1321 x 826mm)
WATER DEPTH TO OVERFLOW							13-1/4 In. (337mm)
FLOOR LOADING		37 Lbs./Sq. Ft. (182 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.									27.8
CUBE (FT3)										45.4
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP					1.6 HP, 9.7 AMPS, 120V.

* see your Home Depot Retailer
List of Required Tools and Supplies:
Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	15 amp GFI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2003

752861-100 Rev. DAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.