American Standard 2806EC WILLIAMSBURG ELITE 6 FT, Whirlpools By American Standard, CUBE FT3

WILLIAMSBURG ELITE™ 6 FT

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

1829mm

279mm		(72)
(11)
	ON/OFF
	SWITCH
457mm	229 x 330mm	PUMP
(18)	(9 X 13)
	FLOOR
	CUTOUT

914mm

(36)

INTEGRAL

FITTING DECK

140mm		OUTLINE OF		PROVIDE ACCESS
(5-1/2)	C/L OF
		CUTOUT	TO PUMP FOR SERVICE
	DRAIN
			ON ALL INSTALLATIONS
	OVERFLOW
C/L OF	108mm	LEVELING STRINGER
OVERFLOW	(4-1/4)	(NOT FOR SUPPORT)
				IN-LINE HEATER
				REMOVABLE
	51mm			BLANK
				546mm
INTEGRAL	(2)			(21-1/2)
FEET				495mm
SUPPORT
				(19-1/2)
ROUGH
FLOOR
	1-1/2 N.P.T.M. THREADS
	1-1/2 O.D.TAILPIECE		51mm	108mm
				(4-1/4)
			(2)

GENERAL SPECIFICATIONS FOR 2806E WHIRLPOOL

INSTALLED SIZE	72 x 36 x 21-1/2 In. (1829 x 914 x 546mm)
WEIGHT		135 Lbs. (61 Kg.)
WEIGHT w/WATER		744 Lbs. (338 Kg.)
GAL. TO OVERFLOW		73 Gal. (276 L)
WHIRLPOOL MIN. OPERATING VOL.		44 Gal. (167 L)
BATHING WELL AT SUMP		45 x 24 In. (1143 x 610mm)
BATHING WELL AT RIM		60 x 30 In. (1524 x 762 mm)
WATER DEPTH TO OVERFLOW		14-1/2 In. (368mm)
FLOOR LOADING		41 Lbs./Sq.Ft. (198 Kgs./Sq.m)
(PROJECTED AREA)
PTS.			25.6
CUBE (FT3)				49.4

	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP		2.1 HP, 14.4 AMPS ,120V.

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

▲CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

●IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

SUPPLY PIPING NOT INCLUDED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

© 2003 American Standard Inc.