Savona Oval Whirlpool, Bathtub only | American Standard 2903.018W

SAVONA OVAL™ WHIRLPOOL

HIGH GLOSS ACRYLIC

❏2903.018W Whirlpool

•Acrylic with fiberglass reinforcement

•Pre-leveled tub bottom

•Dual, molded-in arm rests

•1.5 HP, single speed, self-draining pump/motor

•Factory installed power cord and plug

•Eight multi-directional and flow-adjustable jets including:

-Two foot jets

-Four body massage jets

-Two recessed back-rest jets

•Deck-mounted air switch On/Off

•Two silent air volume controls

•Quick Connect Safe-T-Heater connection system

•Factory installed and tested whirlpool system

❏2903.018WC StayClean™ Whirlpool Massage featuring System I

•Same as 2903.018W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

Nominal Dimensions: 60 x 42-1/4 x 21-1/4 (1524 x 1073 x 540mm)

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ANSI Z124.1 for Plastic Bathtubs

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.

To Be Specified - Required:

❏Color: (specify color)

❏Bath Faucet (specify finish)

❏Rotary Drain: 1583.470 (specify finish)

To Be Specified - Optional:

❏Safe-T-Heater*: 9075.120

❏Jet Trim Ring Kit: 9860.200-two per kit (specify finish) for Body Massage Jets only

For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.

* NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

BV-8

Rev. 9/05	© 2005 American Standard Inc.