American Standard 2903.018W Savona Oval Whirlpool, GENERAL SPECIFICATIONS FOR 2903 BATHING POOL

SAVONA OVAL™ WHIRLPOOL

HIGH GLOSS ACRYLIC

									1524mm
							241 mm		(60)
										▲OUTLINE OF
							(9-1/2)
		1524mm								CUTOUT - USE
		(60)								TEMPLATE
	241 mm		▲OUTLINE OF		SEE FTTG.SPECS
	(9-1/2)
			CUTOUT - USE		FOR DIMENSION
SEE FTTG.SPECS			TEMPLATE
					C OF SUPPLIES
FOR DIMENSION
					L
C OF SUPPLIES								305mm(12) X 229?mm(9)
L				PUMP
								CUTOUT IN FLOOR FOR DRAIN
				(MAY
		305mm(12) X 229?mm(9)
				EXTEND	1073mm
		CUTOUT IN FLOOR FOR DRAIN
				BEYOND	(42-1/4)
1073mm				RIM BY 1-1/2")
(42-1/4)
					537mm
537mm					(21-1/8)
(21-1/8)				PROVIDE ACCESS
				TO PUMP FOR	76mm
76mm		ON/OFF		SERVICING ON ALL
		SWITCH		INSTALLATIONS		(3)
(3)
	CL OF DRAIN						C OF DRAIN
							L
	OUTLET						OUTLET
			C/L OF							C/L OF
	C/L OF	SHOWER ARM
							C/L OF		SHOWER ARM
	VALVES
							VALVES
95mm		C/L OF
(3-3/4) 305mm	102mm				95mm
		SPOUT							C/L OF
(12)	(4)				(3-3/4)		102mm
						305mm			SPOUT
51mm
				1651-1981mm		(12)	(4)
(2)
				(65-78)	51mm
										1651-1981mm
				OPTIONAL	(2)
540mm			INTEGRAL							(65-78)
(21-1/4 )			FEET							OPTIONAL
489mm			SUPPORT		540mm					INTEGRAL
(19-1/4)			ROUGH		(21-1/4 )					FEET
			FLOOR		489mm					SUPPORT
SAFE-T-HEATER	1-1/2 N.P.T.M.				(19-1/4)					ROUGH
REMOVABLE		35mm								FLOOR
	THREADS
BLANK
	1-1/2 O.D.	(1-3/8)	98mm
	TAILPIECE		(3-7/8)				1-1/2 N.P.T.M.		35mm
							THREADS
							1-1/2 O.D.		(1-3/8)	98mm
							TAILPIECE			(3-7/8)

GENERAL SPECIFICATIONS FOR 2903 WHIRLPOOL

INSTALLED SIZE		60 x 42-1/4 x 21-1/4 In.(1524 x 1073 x 540mm)
WEIGHT							107 Lbs. (49 Kg.)
WEIGHT w/WATER						640 Lbs. (291 Kg.)
GAL. TO OVERFLOW								64 Gal. (243 L)
WHIRLPOOL MIN. OPERATING VOL.								53 Gal. (201 L)
BATHING WELL AT SUMP				45 x 23		In. (1143 x 584mm)
BATHING WELL AT RIM				53 x 32		In. (1346 x 813mm)
WATER DEPTH TO OVERFLOW								15 In. (381mm)
FLOOR LOADING			35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
(PROJECTED AREA)
PTS.										27.8
CUBE (FT3)									45.4
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP					1.6	HP, 9.7 AMPS, 120V.

GENERAL SPECIFICATIONS FOR 2903 BATHING POOL

INSTALLED SIZE			60 x 42-1/4 x 21-1/4 In.
			(1524 x 1073 x 540mm)
WEIGHT					107 Lbs. (49 Kg.)
WEIGHT w/WATER				640 Lbs. (291 Kg.)
BATHING WELL AT SUMP		45 x 23 In. (1143 x 584mm)
BATHING WELL AT RIM		53 x 32 In. (1346 x 813mm)
WATER DEPTH TO OVERFLOW						15 In. (381mm)
FLOOR LOADING	35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
(PROJECTED AREA)
PTS.							27.8
CUBE (FT3)								45.4

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.

●IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.

OPTIONAL TILING BEAD KIT AVAILABLE.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

ON SYSTEM II: CONTROL MODULE TO BE MOUNTED BEHIND ACCESS PANEL, A MINIMUM OF (152mm) 6 ABOVE ROUGH FLOOR.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA Certified. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

© 2005 American Standard Inc.