American Standard 2903.XXXW installation instructions Savona Oval, Thank You, Tools, Supplies

SAVONA OVAL™

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2903.XXXW SERIES

WHIRLPOOL/BATHING POOL INSTALLATION INSTRUCTIONS

			1524mm
			(60)
		241 mm		▲OUTLINE OF
		(9-1/2)
				CUTOUT - USE
SEE FTTG.SPECS				TEMPLATE
FOR DIMENSION
C OF SUPPLIES
L					PUMP
			305mm(12) X 229?mm(9)		(MAY
					EXTEND
			CUTOUT IN FLOOR FOR DRAIN
					BEYOND
1073mm					RIM BY 1-1/2")
(42-1/4)
537mm
(21-1/8)					PROVIDE ACCESS
					TO PUMP FOR
76mm			ON/OFF		SERVICING ON ALL
			SWITCH		INSTALLATIONS
	(3)
		CL OF DRAIN
		OUTLET
				C/L OF
		C/L OF	SHOWER ARM
		VALVES
95mm			C/L OF
(3-3/4)		102mm
	305mm		SPOUT
	(12)	(4)
51mm					1651-1981mm
(2)
					(65-78)
					OPTIONAL
540mm				INTEGRAL
(21-1/4 )				FEET
489mm				SUPPORT
(19-1/4)				ROUGH
				FLOOR
SAFE-T-HEATER		1-1/2 N.P.T.M.
REMOVABLE			35mm
		THREADS
BLANK		1-1/2 O.D.	(1-3/8)	98mm
		TAILPIECE		(3-7/8)

GENERAL SPECIFICATIONS FOR 2903 WHIRLPOOL

INSTALLED SIZE		60 x 42-1/4 x 21-1/4 In.(1524 x 1073 x 540mm)
WEIGHT							107 Lbs. (49 Kg.)
WEIGHT w/WATER						640 Lbs. (291 Kg.)
GAL. TO OVERFLOW								64 Gal. (243 L)
WHIRLPOOL MIN. OPERATING VOL.								53 Gal. (201 L)
BATHING WELL AT SUMP				45 x 23		In. (1143 x 584mm)
BATHING WELL AT RIM				53 x 32		In. (1346 x 813mm)
WATER DEPTH TO OVERFLOW								15 In. (381mm)
FLOOR LOADING			35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
(PROJECTED AREA)
PTS.										27.8
CUBE (FT3)									45.4
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP					1.6	HP, 9.7 AMPS, 120V.

GENERAL INSTALLATION INFORMATION

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

• Safe-T-Heater 9075.120*

List of Required Components (not included):

• Drain 1583.470* • Bath Filler*

* see your American Standard Distributor

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
• Tape Measure		• Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	• 15 amp GFI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
• Caulking Gun			Grout

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

If a whirlpool, do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system. Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2005

752878-100 Rev. EAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.