American Standard 4099.100 dimensions Yorkville 16-1/8 Elongated PRESSURE-ASSISTED Toilet

YORKVILLE™ 16-1/8" ELONGATED

PRESSURE-ASSISTED TOILET

VITREOUS CHINA

BARRIER FREE

YORKVILLE™ 16-1/8" ELONGATED

PRESSURE-ASSISTED TOILET

❏2325.101

•Vitreous china

•Low-consumption (6.0 Lpf/1.6 gpf)

•Floor-mounted, back-outlet toilet

•Elongated 16-1/8" high bowl

•Pressure-assisted siphon jet flush action

•Side-mounted chrome trip lever

•Close-coupled flushometer tank*

•Speed Connect® tank/bowl coupling system

•4 bolt caps

•Fully glazed 2" ballpass trapway

•10" x 12" water surface area

•100% factory flush tested

❏3125.016 Elongated 16-1/8" high bowl with four bolt caps and two floor screws

❏4099.100 Flushometer tank complete with coupling components

Component parts:

❏735084-400Tank cover (specify color)

Nominal Dimensions:

819 x 495 x 803mm

(32-1/4" x 19-1/2" x 31-5/8")

Alternate Configurations:

❏4099.700 Tank and tank cover only with tank cover locking device

❏4099.800 Tank and tank cover only with right hand trip lever

Fixture only, seat and supply by others Recommended working pressure range 20 psi - 80ps

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2 for Vitreous China Fixtures

To Be Specified:
❏ Color: ❏ White	❏ Bone	❏ Linen
❏ Silver	❏ Fawn	Beige ❏ Black

❏Seat: American Standard #5324.019 Elongated “Rise and Shine” (with easy to clean lift-off hinge system) solid plastic closed front seat with cover.

❏Seat: American Standard #5325.024 Elongated “Rise and Shine” (with easy to clean lift-off hinge system) solid plastic open front seat with cover.

❏Alternate Seat:

❏Supply with Stop:

* Flushmate III tank system by Flushmate® Div. of Sloan Valve Co © 2008 AS America Inc.

Replaces 2325.100

	FINISHED WALL
		819mm
	19mm ± 6mm	(32-1/4)
					495mm
	(3/4 ± 1/4)
					(19-1/2)
	279mm
	(11)
		470mm
		(18-1/2)
		C/L OF SEAT			C/L
		POST HOLES			381mm
		140 mm (5-1/2)
		CENTER			(15)
						803mm
1/2)					FLEX	(31-5/8)
		410mm			SUPPLY
		(16-1/8)			AS REQ.
(2-	*222mm					13 x 19mm
		102 mm	152 mm
64mm	(8-3/4)					(1/2 x 3/4)
		(4)
				(6)
						SLOTS
				76mm		76mm
				(3)		(3)
		C/L OF
		WASTE			235mm
		OUTLET
					(9-1/4)
	324mm	C/L OF 1/2" DIA HOLES				FINISHED
		152mm (6) CENTERS
	(12-3/4)					FLOOR

648mm (25-1/2)

NOTES:

WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE- FELT (WAX RING NOT RECOMMENDED).

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

M42

Revised 2/08