Sony DSC-P32 Changing Image Transfer settings, Copying images without using Image Transfer

Changing “Image Transfer” settings

You can change “Image Transfer” settings. Right-click the “Image Transfer” icon on the task tray, select [Open Settings]. The settings you can set are as follows: [Basic], [Copy], and [Delete].

Right-click here

When the “Image Transfer” starts, the below window appears.

When you select [Settings] from the above window, you can only change the [Basic] setting.

Copying images without using “Image Transfer”

– Windows 98/98SE/2000/Me

If you do not set to launch “Image Transfer” automatically, you can copy images as following procedure.

aDouble-click [My Computer], then double-click [Removable Disk].

The contents of the “Memory Stick”

inserted in your camera appear.

•This section describes an example of copying images to the “My Documents” folder.

•When the “Removable Disk” icon is not shown, see the right column.

•When using Windows XP, see page 85.

bDouble-click [DCIM], then double-click the folder that the image files you want to copy are stored.

The folder opens.

cDrag and drop the image files into the “My Documents” folder.

The image files are copied to the “My Documents” folder.

•When you try to copy an image to a folder in which an image with the same file name is stored, the overwrite confirmation message appears. Clicking [Yes] overwrites the image. When not overwriting the image, click [No] or change the file name.

When a removable disk icon is not shown

1Right-click [My Computer], then click [Properties].

The “System Properties” screen appears.

•For Windows 2000 users, click the [Hardware] tab on the “System Properties” screen.

2Confirm if other devices are already installed.

1Click [Device Manager].

2Double-click [ Other Devices].

3Confirm if there is a “ Sony

DSC” with a mark.

3If you find either of the devices above, follow the steps below to delete them.

1Click [ Sony DSC].

2Click [Remove]. (In case of Windows 2000, click [Uninstall].) The “Confirm Device Removal” screen appears.

3Click [OK].

The device is deleted.

Try the USB driver installation again using the supplied CD-ROM (page 79).

84