Sony DSC-P72, DSC-P32 Using an external power source Using your camera abroad, Power sources

Using an external power source

Using your camera abroad

AC Adaptor (not supplied)

DC plug

Jack cover

1

,Open the jack cover, then connect the AC-LS5 AC Adaptor (not supplied) to the DC IN jack of the camera.

Connect the plug with the v mark facing toward the LCD screen.

•Be sure to use the AC-LS5 AC Adaptor. Other AC adaptors cannot be used with this camera.

•Connect the AC Adaptor to an easily accessible wall outlet (wall socket) close by. If some trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

2 To a wall outlet (wall socket)

	1
2	Power cord
	(mains lead)

,Connect the power cord (mains lead) to the AC Adaptor and to a wall outlet (wall socket).

•When you have finished using the AC Adaptor, disconnect it from the DC IN jack of the camera.

•The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket), even if the unit itself has been turned off.

Power sources

You can use your camera in any country or area with the supplied battery charger or AC Adaptor (not supplied) within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].

BC-CS2A/CS2B

•Do not use an electrical transformer (travel converter), as this may cause a malfunction.

Getting started

19