5 TEST INSTALLED FAUCET

H A N D L E

Move HANDLE down into "off" position and remove AERATOR.

S P R AY

Turn on water supplies and check connections for leaks.

 

Operate HANDLE up and down, left and right to flush water

AERATOR

lines thoroughly.

For faucet with spray, direct SPRAY HEAD into sink and activate SPRAY. Check hose connections for leaks.

Move HANDLE down to "off" position and replace AERATOR.

CHECK CONNECTIONS

FOR LEAKS

6 SERVICE

Reduced flow. If the flow gradually reduces over a number of months, the AERATOR may have collected debris. To clean, remove AERATOR and rinse with water and remove any debris. Turn on faucet to wash any debris out of the faucet. Thread AERATOR back into spout. Operate faucet.

Spout leakage. If fitting leaks above or below SPOUT HUB remove SPOUT as follows and check SPOUT O-RINGS and SPACER O-RINGS.

Loosen SET SCREW (1). Pull HANDLE (2) off valve stem.

Remove CAP (3) and and RETAINER (4). Loosen CARTRIDGE SCREWS (5) and remove CARTRIDGE (6).

Pull off SPACER (7) and O-RINGS (8).

Remove SPOUT (11) by pulling up gently while moving SPOUT (11) side to side.

2 1

3

4

5

Check both SPOUT O-RINGS (10). Replace if necessary.

11

6

7

On models with SPRAYS, DIVERTER (9) can be cleaned by pulling DIVERTER (9) out of the MANIFOLD (12). Clean DIVERTER (9) and MANIFOLD (12). Push DIVERTER (9) back into MANIFOLD (12).

A E R AT O R

Reverse procedure to reinstall SPOUT, CARTRIDGE and HANDLE.

 

8

10

S P O U T

 

H U B

Clogged CARTRIDGE outlets or inlets may cause reduced flow.

9

To clean, first turn off water supply then:

Loosen HANDLE SCREW (1) and remove HANDLE (2).

12

Remove ESCUTCHEON CAP (3). unscrew the three CARTRIDGE SCREWS (5).

Clean inlets of CARTRIDGE (6) and MANIFOLD (12).

Reassemble CARTRIDGE (6), alternately tightening SCREWS (5). Replace CAP (3) and HANDLE (2). Check flow.

HOT LIMIT SAFETY STOP ADJUSTMENT

By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP reduces risk of accidental scalding. To set the maximum hot water temperature of your faucets, all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP.

"A"

PRY RED RING FORWARD AND ROTATE COUNTER- CLOCKWISE ONE CLICK

Remove HANDLE BUTTON (1) and loosen SET SCREW (2). Pull HANDLE (3) off valve stem. Pull off CAP (4). Use a flat blade screwdriver or your fingers to pull up and rotate red

HOT LIMIT SAFETY STOP (5). Follow Step "A" or "B" to adjust min./max.discharge temperature. "0" being the hottest to "7" the coldest temperature setting. Factory set at "0".

Replace ESCUTCHEON CAP (4), HANDLE (3), tighten HANDLE SCREW (1) and install INDEX BUTTON (2).

TEMPERATURE

SETTING NUMBERS

"B"

PRY RED RING FORWARD AND ROTATE CLOCKWISE

"B" "B"

ADJUSTMENT WHEN

WATER IS TOO COLD

"A"

"A"

 

 

 

 

0

ADJUSTMENT WHEN

 

 

 

1

 

 

4

 

2

 

 

WATER IS TOO HOT

3

 

 

 

5 6

6

5

"RED RING"- HOT LIMIT SAFETY STOP

M968188 REV . 1 . 1

Page 2 Page 3
Page 3
Image 3
American Standard 3821.6XX Test Installed Faucet, Service, Clogged Cartridge outlets or inlets may cause reduced flow
Page 2 Page 3

3821.6XX specifications

The American Standard 3821.6XX is a remarkable model that has garnered attention for its blend of modern design, superior performance, and advanced technology. As a part of American Standard's extensive range of bathroom fixtures, this toilet is engineered with user comfort and sustainability in mind, making it an ideal choice for homeowners looking to upgrade their bathrooms.

One of the standout features of the 3821.6XX is its efficient flushing system. Utilizing the company's AquaCeramic technology, this model not only ensures powerful flushing performance but also helps in maintaining a cleaner bowl by reducing the buildup of stains and grime. This technology is particularly beneficial for households looking to minimize water usage without sacrificing performance. The 3821.6XX boasts a water-efficient design, using just 1.28 gallons per flush, which helps lower water bills and is certified by the EPA's WaterSense program.

The design of the 3821.6XX is equally impressive. It features a sleek, elongated bowl that offers a more comfortable seating experience compared to round bowls, making it suitable for all users. The chair-height configuration also allows for easier accessibility, especially for individuals with mobility challenges. The smooth lines and modern aesthetic of the toilet make it a versatile addition to any bathroom decor.

In terms of durability, the 3821.6XX is built with high-quality materials that ensure longevity and resistance to wear. The vitreous china construction adds a layer of strength while the finish resists chipping and fading. Additionally, the toilet comes with a powerful yet quiet flush mechanism, allowing for privacy without the disruptive sounds often associated with older models.

Installation of the 3821.6XX is straightforward, thanks to its standard size and compatibility with existing plumbing. This makes it a practical choice for DIY enthusiasts and professional installers alike looking for a reliable, efficient upgrade.

Another key aspect of the American Standard 3821.6XX is its commitment to sustainability. By promoting water conservation and reducing waste, this model aligns perfectly with modern eco-conscious ideals. As more consumers prioritize environmental responsibility, the 3821.6XX stands as a prime example of how bathroom fixtures can contribute to global sustainability efforts without compromising on style and comfort.

In summary, the American Standard 3821.6XX is a well-rounded toilet that excels in efficiency, design, and user-friendly features. It offers a powerful yet eco-friendly flush, a comfortable seating experience, and a durable construction that makes it a smart investment for any modern bathroom.
Top Page Image Contents