American Standard 2241.016, 4037.017, 3338.011 dimensions Renaissance Round Front Toilet

RENAISSANCE™ ROUND FRONT TOILET

❑2241.016

•Vitreous china

•Low-consumption (6.0 Lpf/1.6 gpf)

•305mm (12") rough-in

•Round front bowl

•Close-coupled tank

•Color matched trip lever

•2 bolt caps

•100% factory fl ush tested

❑3338.011 Bowl

❑4037.017 Tank

Nominal Dimensions:

693 x 505 x 752mm

(27-5/16" x 19-7/8" x 29-5/8")

Fixture only, seat and supply by others

RENAISSANCE™ ROUND FRONT TOILET

VITREOUS CHINA

FINISHED WALL

Compliance Certifications -

17mm ± 6mm (11/16 ±1/4)

693mm

(27-5/16)

Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

84mm (3-5/16)

232mm	505mm
	(19-7/8)

(9-1/8)

425mm

C/L

(16-3/4)

C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS)

			752mm
		SUPPLY	(29-5/8)
		AS
		REQ'D
		383mm
		(15-1/16)
		*203mm	375mm
		(8)	(14-3/4)
	16mm	152mm
	(5/8)	(6)
	308mm	FINISHED	232mm
159mm		FLOOR
			(9-1/8)
(6-1/4)	(11-1/4)

305mm

(12)C/L OF OUTLET

To Be Specified:

❏Color: ❏ White ❏ Bone

❏Seat: American Standard #5322.011 “Rise and Shine" solid plastic closed front seat with cover.

❏Seat: American Standard #5308.014 “Laurel" molded closed front seat with cover.

❏Alternate Seat:

❏Supply with stop:

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED.

IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	K75
© 2006 American Standard Inc.		Revised 5/05