TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to locate the remedy to your problem.
PROBLEM | POSSIBLE CAUSE | SOLUTION | |
|
|
| |
| No power plug connection at the AC | Insert the power plug into the AC | |
No power when | outlet. | outlet. | |
POWER is on. | The MAIN POWER switch on the | Switch on the MAIN POWER. | |
| back panel is off. | ||
|
| ||
No sound. | Volume control is set to minimum. | Turn up the MASTER VOLUME. | |
The wrong function is selected. | Select the correct function. | ||
| |||
CASSETTE | Dirty capstan. | Clean capstan. | |
Irregular cassette tape winding. | Replace tape. | ||
Unsteady tape sound. | |||
Pitch knob may be in wrong position. | Adjust Pitch knob. | ||
| |||
| The erasure prevention tabs are | Replace tape or cover tab openings | |
| broken out. | with adhesive tape. | |
Cannot record. | Play button and Record button were | When recording, make sure that both | |
| not pressed down simultaneously. | the Record and Play buttons are | |
| pressed down at the same time. | ||
|
| ||
Recorded tape sound | Dirty head. | Clean capstan. | |
is distorted. | Faulty cassette tape. | Replace tape. | |
| Unrecorded tape inserted into | Insert a | |
Cannot copy from | DECK 2. |
| |
DECK 2 to DECK 1. | PLAY/RECORD function selector B | Set the Function button to TAPE Mode. | |
| |||
| in the wrong Mode. |
| |
|
|
| |
| Disc is inserted upside down. | Insert disc correctly. | |
| Disc is dirty. | Wipe clean with soft cloth. | |
|
|
| |
CD PLAYER | Disc is scratched. | Use a new disc. | |
Cannot work normally. | Disc seriously warped. | Use a new disc. | |
|
|
| |
| A nonstandard disc is inserted. | Use only brand name disc. | |
| Moisture has formed inside the CD | Wait about 20 to 30 minutes to let it | |
| deck. | dry out. | |
| Video cable is not connected prop- | Connect the video cable to the | |
| system’ s VIDEO OUT and to the TV | ||
| erly to the TV. | ||
|
| VIDEO IN. | |
| Source selector on TV is not set to | Using your TV remote to select VIDEO | |
No song lyrics appear | VIDEO. | input. | |
on screen. | TV does not have video line input. | Connect from VIDEO OUT of the sys- | |
|
| tem to the VIDEO IN of your VCR or | |
|
| connect to an RF modulator and then | |
|
| to the TV cable input. | |
|
|
| |
Song lyrics leave | Operating | Return to the start of the song selec- | |
double image during | continuously on a song selection | tion to reset or clear video screen. | |
play. | will cause double image. |
| |
|
|
| |
Blurred TV screen | Incorrect setting of PAL/NTSC | Select the correct mode on the back | |
shown. | switch. | panel. |
17