American Standard 403, 404, 641 Wall-hung on furniture, Mounting on Furniture, Vanity Installation

2. Wall-hung on furniture

2-A		2-E
	Mounting on Furniture:	Use the mounting holes on the rear of the lavatory
	Assemble vanity as per instructions.	to secure the sink to the wall.

2-B 2-F

Mount the faucet and drain assembly (not included) on the sink following the manufacturer’s instructions. Be certain to apply a bead of sealing putty on the underside of the drain (Part “A”) in order to ensure a watertight seal between the sink and drain. Remove excess putty after installing drain on sink.

Shut-Off Valves

A

Connect supply line to faucet (finger tight) and carefully bend tubes to engage with the supply shut-off valves. Tighten connections at faucet and shut-off valves for secure seal.

2-C	Vanity Installation:
	• Place the sink temporarily on the vanity to	2-G
	check for alignment and clearance
2-D
	After checking fit and alignment, turn sink upside down
	and apply a generous portion of silicone adhesive	C
	around the under side of the rim near the edge. Place
		B
	sink in position. Wipe off excess adhesive.

Connect trap to drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area “B”) or part of the horizontal leg of the trap (area “C”). Secure joints for watertight assembly.

3 7301354-100 Rev. B