3 CONNECT SPRAY HOSE AND SPOUT HOSE
Feed HAND SPRAY HOSE (1) through SPRAY HOLDER (2). Use wrench to tighten COUPLING NUT (3) on SPRAY HOSE (1) to SIDE SPRAY CONNECTION (4) on fitting.
Make sure SEAL WASHER (5) is installed in COUPLING
NUT (6). Connect threaded end of HOSE (7) to SPOUT HOSE
COUPLING NUT (6) from fitting. Use wrench to tighten.
1
2
6 |
|
5 | 4 |
7 | 3 |
|
4 CHECK CONNECTIONS FOR LEAKS.
Move HANDLE (1) down into "off" position.
Turn on water supplies and check connections for leaks. 
1
CHECK CONNECTIONS
FOR LEAKS
M 9 6 8 5 8 3
