LAKELAND
SINGLE CONTROL KITCHEN FAUCET WITH CAST SPOUT with EverClean™ Finish
Installation Instructions
4114.001
4114.003
Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets.
EverClean Finish
•One wipe effortlessly removes spots
•Eliminates the need for cleaners and scrubbing
•Permanent surface protectant remains beautiful for the life of the faucet
Certified to comply with ANSI A112.18.1M
. 3 & 7
•EverClean™ available on: Polished Chrome, Satin Nickel, Stainless Steel, Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds
TOOLS REQUIRED
3FHVMBS4DSFXESJWFS | Phillips Screwdriver |
|
Adjustable Wrench |
| |
| Plumbers' Putty or Caulking | |
|
|
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON
CAUTION | Turn off hot and cold water | ||
supplies before beginning. | |||
|
(A) Installation with ESCUTCHEON (1). Apply a bead of putty to bottom edge of ESCUTCHEON with PUTTY PLATE (1). Insert supply HOSES (2) and SHANK (3) through hole of ESCUTCHEON with PUTTY PLATE (1) and mounting surface. Follow mounting instructions below to secure faucet to mounting surface.
(B) Installation less ESCUTCHEON (1). Discard ESCUTCHEON with PUTTY PLATE (1). Insert supply HOSES (2) and SHANK (3) through mounting hole and seat SPOUT BASE onto sink or mounting surface. Do not use putty.
Assemble RUBBER WASHER (4), BRASS WASHER (5), and threaded LOCKNUT (6) onto SHANK (3) from underside of sink or mounting surface. Hand tighten LOCKNUT (6) and check that rotation of HANDLE (7) from HOT to COLD is centered.
Use a screwdriver to tighten SCREWS (8) on LOCKNUT (6). Work your way around LOCKNUT (6), tightening the screws slightly each time until all are snug to ensure even pressure.
7 | 7 |
A | B |
| SPOUT BASE |
1
P U T T Y
2 
3
2
3
4
5
8 | 6 |
SINK OR
MOUNTING
SURFACE
4
5
8 | 6 |
