| Installation | |
PEKOE | Instructions | |
4332.350.XXX | ||
Single Lever | ||
| ||
Kitchen Faucet |
|
Thank you for selecting
To ensure that your installation proceeds
Certified to comply with ANSI A112.18.1M
M968577 Rev . 1 . 1
Recommended Tools
Phillips Screwdriver
Channel Locks | Adjustable Wrench | Plumbers' Putty or Caulking | Tubing Cutter |
|
|
1 INSTALL FITTING
CAUTION | Turn off hot and cold water |
supplies before beginning. |
Make certain the SEAL (1) is properly seated in recess of faucet body.
Insert supply HOSES (2) and SHANK (3) through center hole of sink or mounting surface.
Assemble RUBBER WASHER (4), PLASTIC WASHER (5),
METAL WASHER (6) and threaded LOCKNUT (7) onto
SHANK (3) from underside of sink or mounting surface.
Hand tighten LOCKNUT (7) and check that faucet is centered.
Use a screwdriver to tighten SCREWS (8) on LOCKNUT (7). Work your way around LOCKNUT (7), tightening the screws slightly each time until all are snug to ensure even pressure.
RECESS
3
4
5
6
7
8
1
2