American Standard 4501 installation instructions Installation Instructions, 4 5 0 4 5 0 1 S

SYMPHONY

PRESSURE BALANCING BATH AND SHOWER TRIM KITS

Installation Instructions

4 5 0 1

4 5 0 1 S

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

Certified to comply with ANSI A112.18.1

M968805 REV. 1 . 4

ROUGHING-IN DIMENSIONS
To assure proper positioning in relation
to wall, note roughing-in dimensions.	1-5/8" TO 3-1/4"
FINISHED WALL	1/2" NPT
3-5/8" REF.	OPTIONAL TO FINISHED
	FLOOR USUALLY
	BETWEEN 65'' AND 80''	INLETS 3-3/8"
5-1/2" REF.		SHR. 1/2" NPT
"SEE ILLUSTRATION "
74" FOR HEAD		3-3/8"
		INLETS 1/2" NPT
CLEARANCE
	6-3/4"
18" OPTIONAL		TUB PORT 1/2" NPT'
3-5/8"		THREADED INLETS
5-1/8" REF.	1/2" NPT''
	4"
TOP OF TUB RIM
BOTTOM OF TUB

1	ROUGHING-IN	CAUTION Turn off water at main supply.
			5
NOTE When soldering, remove PLASTER GUARD, CARTRIDGES and CHECK STOPS (IF PRESENT). When finished soldering,
			7
	flush valve body, replace cartridges, check stops (if present) and plaster guard to continue installation. Use thread
	sealant or Teflon tape on threaded connections.

See Roughing-in diagram before starting. Connections are:

1/2" female NPT for threaded inlets Connect RISER PIPE (1) to MANIFOLD (2) top outlet marked "SHR".

Connect TUB FILLER PIPE (3) at bottom outlet marked "TUB".

For proper positioning the finished wall must be within side wall of PLASTER GUARD (4).

If the valve is installed on a fiberglass		1
or other thin wall application, the
PLASTER GUARD (4) can be used as a support.		2
	Cut a 4" dia. hole in the shower stall.
	Drill two additional 1" holes to allow access	HOT
	to the stops.
	Remove PLASTER GUARD (4), rotate 90˚
	so that indicated screw holes fit MANIFOLD (2).
	Push CAP on valve, place ESCUTCHEON on and	3
	attach with screws.
Connect hot and cold water supplies.
Cap off shower pipe (5) and tub filler pipe (6).

For support, use pipe BRACES (7) secured to wooden braces. With valve turned off, turn on water supplies. Check for leaks.

COLD

6

4