American Standard 5032.010 dimensions Heritage Bidet, 654 x 359 x 362mm 25-3/4 x 14-1/8 x 14-1/4

HERITAGE™ BIDET

VITREOUS CHINA

HERITAGE™ BIDET

❑5032.026 For deck-mounted fitting (illustrated)

•Vitreous china

•Flushing rim and vertical cleansing spray

•Integral overflow

•Concealed floor anchor bracket

•Two bolt caps

Shown with 2373.401 Enfield fitting with handles (not included)

❑5032.010 For over-the-rim fitting

•Vitreous china

•Punched for single hole, over-the-rim fitting, less flushing rim and spray

•Integral overflow

•Two bolt caps

Nominal Dimensions:

654 x 359 x 362mm

(25-3/4" x 14-1/8" x 14-1/4")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures

To Be Specified:

❏ Color: ❏ White ❏ Bone ❏ Linen

❏Bidet Fitting*:

❏Fitting Finish:

❏Trap:

❏Supplies with Stops:

* See faucet section for additional models available

25mm (1) DIA. HOLE

FOR POP-UP ROD(3) 35mm (1-3/8) DIA.

VALVE HOLES

44mm (1-3/4) DIA. STD.

DRAIN OUTLET

FINISHED

WALL

203mm

(8)

		C/L
102mm		359mm
(4)
		(14-1/8)
76mm (3)	19mm
SUGGESTED	(3/4)	29mm (1-1/8) DIA. HOLE
MINIMUM 64mm
	114mm	FOR SPRAY
(2-1/2)
	(4-1/2)
127mm	222mm
(5)	(8-3/4)
	C/L OF 3/8 HOT & COLD INLETS
	654mm
73mm	(25-3/4)
(2-7/8)	VACUUM
MIN.
	BREAKER
	241mm
	(9-1/2)
114mm
(4-1/2)
	C/L OF DRAIN OUTLET

SUPPLIES

AS REQUIRED

NOTES:
	*127mm(5)
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES ARE SUGGESTED.
“P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND MUST BE
ORDERED SEPARATELY. BIDET FITTING HAS TRANSFER VALVE
FEATURE.

●REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BIDET AND

FITTING FOR ADDITIONAL INFORMATION.

PROVISIONS MUST BE MADE FOR THE INSTALLATION OF TRAP IN

FLOOR.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

		362mm
COUPLING		(14-1/4)
NUTS ON	279mm
FITTING
	(11)
		FINISHED
		FLOOR
	HANGER
241mm	1-1/4 O.D. TAILPIECE
	432mm	76mm
(9-1/2)
	(17)	(3)
REF.
	C/L OF (2) 8mm (5/16) DIA. FOOT

ANCHOR HOLES ON 76mm (3") CENTERS

	K1
© 2008 AS America Inc.		Revised 2/08