5TO GAIN ACCESS TO VALVE FOR SERVICING

Pull INDEX CAP, unscrew HANDLE SCREW and pull HANDLE off valve stem.

Remove two SCREWS holding ESCUTCHEON and remove ESCUTCHEON.

Remove COVER by pulling straight out.

Shut off water supply by either closing off main water supply, or closing off the hot and cold CHECK STOPS on valve.

VALVE LEAKS WHEN SHUT OFF

Remove CARTRIDGE (1) by removing CARTRIDGE SCREWS (2). Remove three SCREWS (3) from FIXATION RING (4) and pull out PRESSURE BALANCING (5) unit.

Clean SEALS (9) on base of CARTRIDGE (1). Check base of PRESSURE BALANCING UNIT (5) and clean O-RINGS (6). Remove CAPS (7) and check O-RINGS on inside of CAPS (7). Clean inside sealing surfaces of VALVE BODY (8).

Re-assemble PRESSURE BALANCING UNIT (5) and CARTRIDGE (1). Tighten all screws.

Turn on water supply and see above for installing TRIM and HANDLE.

UNABLE TO MAINTAIN CONSTANT TEMPERATURE

Remove PRESSURE BALANCE UNIT (5).

Remove CAPS (7) and clean valve thoroughly.

Examine balancing unit and check condition of O-ring on end of piston. Piston should move back and forth. Order Repair Part M952100-0070A if balancing unit is defective.

Replace CAPS (7) and install PRESSURE BALANCE UNIT (5). Make sure inlets line up with two holes in bottom of casting. Top flange should butt-up against top of casting.

BACK TO BACK INSTALLATION

Remove PRESSURE BALANCE UNIT (5). Rotate PRESSURE BALANCE UNIT (5) 180˚ so that the inlets face up and the large outlet port faces down.

Push PRESSURE BALANCE UNIT (5) in casting make sure inlets line up with holes in bottom of casting. Top flange should butt up against top of casting.

Reassemble FIXATION RING (4) and CARTRIDGE (1).

6

4

 

 

1

LARGE OUTLET

8

7

 

5

 

 

 

 

 

 

5

3

INLETS

 

 

 

9 2

ROTATE 180˚

BACK TO BACK INSTALLATION

6CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

M 9 6 8 4 5 7 B

Page 3
Image 3
American Standard 6022, 6021 Care Instructions, To Gain Access to Valve for Servicing, Valve Leaks When Shut OFF

6022, 6021 specifications

The American Standard 6021 and 6022 represent a pinnacle of design and functionality in the world of bathroom plumbing fixtures. These models are specifically crafted to blend seamlessly into any modern bathroom while also offering an array of cutting-edge features designed for everyday convenience and durability.

One of the standout characteristics of the American Standard 6021 and 6022 is their elegant design. Both models showcase a sleek, contemporary silhouette that pairs well with various bathroom aesthetics, ranging from minimalist to more traditional styles. Their finish options are designed to resist tarnishing and wear, ensuring a long-lasting shine that enhances the overall look of the bathroom.

In terms of technology, these models are equipped with innovative water-saving features. The 6021 and 6022 are designed with high-efficiency mechanisms that promote water conservation without sacrificing performance. This commitment to sustainability is further emphasized by their WaterSense certification, which guarantees that these fixtures meet strict environmental standards while delivering a powerful and satisfying flow.

Durability is another important characteristic of the American Standard 6021 and 6022. Constructed from high-quality materials, these fixtures are engineered to withstand the rigors of daily use. Their ceramic disc valve technology ensures a drip-free performance, minimizing the need for repairs and maintenance. This reliability is complemented by easy installation processes, making it simple for homeowners to upgrade their bathrooms with these high-performance models.

The features of these models do not end at aesthetics and water efficiency. The American Standard 6021 and 6022 also include ergonomic considerations that enhance user comfort. From handle placement to spout height, every detail is thoughtfully designed to improve the overall user experience.

Furthermore, both models come with customizable options, allowing homeowners to select the features that best suit their needs. This versatility makes them an excellent choice for anyone looking to elevate their bathroom space.

In summary, the American Standard 6021 and 6022 shine in any bathroom setting. With their exceptional design, advanced technology, durability, and customizable features, they stand as a testament to American Standard’s commitment to quality and innovation in plumbing fixtures. These models not only enhance the aesthetic appeal of a bathroom but also provide practicality and sustainability, making them a wise investment for any homeowner.