| Installation | |
STANDARD | Instructions | |
COLLECTION | 6721 | |
ROBE HOOK | 6729 | |
6723 | ||
TOWEL RING |
TISSUE PAPER HOLDER
Thank you for selecting
To ensure that your installation proceeds
Certified to comply with ANSI A112.18.1 |
|
U.S. Patent No. D403,750 | M 9 6 8 2 1 6 C |
|
Regular Screwdriver
10' | Drill |
| |
Tape Measure | Phillips Screwdriver |
|
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.
1 ROBE HOOK, TOWEL RING and TISSUE PAPER HOLDER MOUNTING & INSTALLATION
The ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3) work best if secured to a wall stud or cross brace within the wall, using the SCREWS (3) supplied.
If the ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3) is to be installed on a tile or plaster wall the TILE ANCHORS (4) or DRYWALL ANCHORS (6) and SCREWS (3) should be used.
Determine desired height and location (optional) and mark a center line. Using the MOUNTING PLATE (5) as a template mark the two mounting holes. If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (3).
For installations on drywall, use DRYWALL ANCHORS (6) and SCREWS (3) for securing MOUNTING PLATE (5) to wall. Place #2 Phillips screwdriver or cordless screwdriver into recess of anchor. Press into drywall while turning the anchor clockwise until it is seated flush with the wall. Place MOUNTING PLATE (5) over DRYWALL ANCHORS (6) and insert SCREWS (3) with #2 Phillips screwdriver.
See illustration below. Secure MOUNTING PLATE (5) to wall with SCREWS (3).
For installations on tiled walls, If TILE ANCHORS (4) and SCREWS (3) are used for securing MOUNTING PLATE (5), then drill two 1/4" diameter holes a minimum of
Install the WALL ESCUTCHEON (7) on the MOUNTING PLATE (5). Place the ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3) over the ESCUTCHEON (7). Secure with MOUNTING SCREW (8). Tighten fully.
Push INDEX BUTTON (9) into ROBE HOOK (1), TOWEL RING (2) and TISSUE PAPER HOLDER (3). See illustration.
|
|
|
|
| 3 |
| 8 |
|
|
| USE MOUNTING PLATE |
|
|
|
|
|
|
| AS TEMPLATE |
|
|
|
|
|
| 4 |
|
| 7 |
| 9 |
|
|
|
|
|
| ||
3 | 5 | 6 |
|
| 3 |
|
|
|
|
|
|
| |||
|
|
| CENTER |
|
|
|
|
|
|
| LINE | 4 |
|
| 9 |
|
|
|
|
| 8 | ||
|
|
|
|
|
| 8 | |
|
|
|
|
|
|
| |
|
| 6 | 30 TO 72 |
| 5 |
| 9 |
|
| INCHES FROM |
|
| |||
|
|
| FLOOR |
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
|
|
| FINISHED |
|
|
|
|
|
|
| WALL |
|
|
21