American Standard 6771 installation instructions Required Wall Opening, A - A, Recommended Tools

			Installation
“	T H E	”	Instructions
			6771
	C O L L E C T I O N™
￿by
MIRROR/MEDICINE CABINET				￿￿￿￿￿￿￿￿
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.				Certified to comply with ANSI A112.18.1

Tape Measure	Drill	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	Tape	Level
Recommended Tools
		Regular Screwdriver
10'

REQUIRED WALL OPENING

Caution; Before cutting into any existing wall check that there is no interference with piping or electrical wiring.

Ideally the MIRROR/MEDICINE CABINET can be installed between two wall studs on 16" centers. 2x4 reinforcement on either side are recommended. The required opening in the wall is 14-3/8" in width by 22" from top to bottom. If wall studs are not in desired location framing the rough opening will be required. See Illustrations below for rough opening and suggested framing.

Determine the height and location and draw center lines to layout the wall opening.

Before installing the medicine cabinet with mirror the dry wall and any finished wall should be completed.

2"

29"

A

16"

2x4 WALL STUDS 16" ON CENTER

DRY WALL AND

2x4 SIDEFINISHED WALL REINFORCEMENT

2x4 TOP SUPPORT

14-3/8"

22"

SUGGESTED FRAMING

FOR ROUGH OPENING

	2x4 WALL STUD
A	16" ON CENTER	16"
	2x4 SIDE
		14-3/8"
	REINFORCEMENT	ROUGH OPENING
2x4 BOTTOM
SUPPORT

1/2" DRY WALL	INTERIOR DEPTH
	4-1/8" MINIMUM

FINISHED WALL "A - A"

OUTSIDE DIMENSIONS OF CABINET

ARE 14" X 21-3/4"

4" CABINET DEPTH