American Standard 7145.001, 7145.805 Silhouette Double Bowl Sink, Americast, Revised 2/08

SILHOUETTE™ 33"

DOUBLE BOWL SINK

AMERICAST®

7145.803/804/805 Top Mount

	FINISHED WALL		4" (102mm)
	OR SPLASHBACK C/L		4" (102mm)
				4" (102mm) 1-1/2" (38mm)
				DIA. HOLES TYP.
2" (51mm)	4" (102mm)			2-1/8"
				(54mm)
OPTIONAL
7-7/8"
(200mm)
8-5/8"
(219mm)				7145.805
				5 HOLE
				7145.804
				4 HOLE
3-1/2"
(89mm)
DIA.
				22"
				(559mm)
1-1/2" (38mm)		10-1/8"	7-7/8"	*CUTOUT NOTE
RAD. TYP.	16-1/2"	(257mm)	(200mm)
	(419mm)
			33"
			(838mm)

NOTES:

* TOP MOUNT (7145.803/4/5): COUNTERTOP CUTOUT

806 X 527mm WITH 25mm RADIUS (31-3/4 X 20-3/4 WITH 1" RAD.)

AT CORNERS.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND COUNTERTOP SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME Standard A112.19.4

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

1/2"

(13mm)

SEALING	COUNTERTOP
COMPOUND
	(BY OTHERS)

9-1/8"

(232mm)

5-3/4"

(146mm)

36" (914mm)

SUGGESTED

FINISHED

1-1/2" O.D.FLOOR TAILPIECE

NOTES:

*TEMPLATE PROVIDED WITH MOUNTING KIT 791326-100 FOR EXPOSED FAUCET DECK OR UNDERCOUNTER FAUCET DECK COUNTERTOP CUTOUT VARIATIONS.

FITTINGS AND UNDERCOUNTER MOUNTING KIT NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND COUNTERTOP SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME Standard A112.19.4

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

Undercounter Mount

	FINISHED WALL		4" (102mm)
			C/L	4" (102mm)
	OR SPLASHBACK				1-1/2" (38mm)
				4" (102mm)	DIA. HOLES TYP.
2" (51mm)	4" (102mm)				2-1/8"
OPTIONAL					(54mm)
7-7/8"
(200mm)
8-5/8"					7145.805
(219mm)
					5 HOLE
					7145.804
					4 HOLE	22"
3-1/2"						(559mm)
(89mm)
DIA.					MOUNTING CLIP
					(SEE DETAIL)
1-1/2" (38mm)		10-1/8"	7-7/8"	*CUTOUT
	16-1/2"	(257mm)	(200mm)	NOTE	DETAIL OF MOUNTING CLIP
RAD. TYP.						(KIT No.791002-100)
	(419mm)
		33"				BRASS	3/4"
						INSERT
		(838mm)					(19mm)
						SINK
	SEALING			COUNTERTOP			MIN.
	COMPOUND
				(BY OTHERS)
						CLIP
						MACH.
						SCREW
					REFER TO INSTRUCTIONS
					PROVIDED WITH KIT FOR
					ADDITIONAL INFORMATION
9-1/2"
(241mm)
5-3/4"
(146mm)
					36" (914mm)
				SUGGESTED
		1-1/2" O.D.		FINISHED
				FLOOR
		TAILPIECE

	G28
© 2008 AS America Inc.		Revised 2/08