Rondo Whirlpool

RONDO™ WHIRLPOOL

HIGH GLOSS ACRYLIC

❏7242.028W Whirlpool featuring System II

•Acrylic with fiberglass reinforcement

•Pre-leveled tub bottom

•Two person design with center drain and dual lumbar ends

•Wave style grab bar

•2.0 HP, two speed, self-draining pump/motor with pulse feature

•Factory installed power cord and plug

•Ten multi-directional and flow-adjustable jets including:

-Two Ideal-flow jets

-Six body massage jets

-Two recessed back-rest jets

•Deck-mounted electronic control with 20 minute built-in timed safety shut off and Chrome Bezel

•Three silent air volume controls

•Quick Connect Safe-T-Heater connection system

•Factory installed and tested whirlpool system

•Same as 7242.028W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®

Nominal Dimensions: 1816 x 1067 x 546mm (71-1/2” x 42” x 21-1/2")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•Underwriters Laboratories - Hydromassage Bathtubs UL 1795

•ASME A112.19.7M for Whirlpool Appliances

•ANSI Z124.1 for Plastic Bathtubs

•ASTM E162 for Flammability

•NFPA 258 for Smoke Density

NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.

To Be Specified - Required:

❏Color:

❏Bath Filler: (specify finish)

❏Symphony Drain: 1573.272 (specify color) or

❏Bath Drain: 1583.470 (specify finish)

To Be Specified - Optional:

❏Safe-T-Heater*: 9075.120

❏Universal Tile Bead Kit: 751755-100

❏Twist Syle Grab Bar: 750565-000 (specify color)

❏System II Control Bezel: 9861.100 (specify finish)

For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.

*NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

BV-10

Rev. 3/03