2

 

HANGER

MOUNTING SCREW

 

*C/L OF

 

HANGER

HOLES (4)

 

ANCHORING

 

 

SLOTS

 

 

HOLES FOR

 

 

ANCHOR

 

36"

SCREWS

 

IN BACK

POSITIONING

C/L

DRAPERY

SCREW SLOTS (2)

30-3/4"

SUPPLIES AS

 

 

 

 

REQUIRED

 

WASTE

 

 

FINISHED FLOOR

Fig. 1

Fig. 2

Position hanger according to Step 1, making sure its center is aligned with the waste hole centerline (Fig. 1). Mark the hanger screw locations through its mounting holes. Drill pilot holes in positioning screw slots of hanger (Fig. 2).

3

We recommend using two people for installation.

Lavatory

Steel Hanger

1.Affix hanger to wall (hand tighten only).

2.Move console table legs into approximate position against the wall.

3.Mount lavatory on bracket making sure the front leg grommets of console recess into the holes on the underside of the lavatory.

4.Mark the bottom anchor screw holes in the lavatory.

5.With a pencil, mark the floor around each foot of the console table.

6.Remove the lavatory and the console table legs.

7.Tighten the hanger positioning screws and drill pilot holes for bracket mounting screws and lavatory anchor screws. Install and tighten the bracket mounting screws.

8.Use 1/4" drill bit and drill holes marked on finished floor at least 1/8" deep.

Mounting

Screw

Hanger

Positioning

Screw

Front Leg

Anchor Screw

Grommet

in Lavatory

of Console

 

Table

 

Feet are adjustable

4

Following manufacturer's instructions, install faucet and drain assembly. (Not included). Be certain to apply a bead of sealing putty on the underside of the drain in order to ensure a watertight seal between the

lavatory and drain. Remove excess putty after installing drain on lavatory.

Move console table legs in place and position the feet in the holes previously drilled in the floor in Step 3. Return the fitted lavatory to the installed position. Level the lavatory by using the adjustable feet and the rear leg adjustment bumper on the console table legs.

Rear Leg

Adjustment

Bumper

4

5

Connect the trap to drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area "B") or part of the horizontal leg of the trap (area "C").

Secure lavatory on hanger as shown in Step 3. Insert and tighten anchor screws. Connect hot and cold supply lines to the shut-off valves. Tighten trap joints for watertight assembly. Apply a bead of caulk around the edge which contacts the wall as shown. Insert the oval glass shelf onto the shelf support of the console table legs.

C

B

- 3 -

730520 - 100 Rev . D

Page 2 Page 4
Page 3
Image 3
American Standard 7483.295, 7483.002 installation instructions Lavatory Steel Hanger
Page 2 Page 4

7483.295, 7483.002 specifications

American Standard has long been a trusted name in the plumbing industry, known for its commitment to innovation and quality. Two popular models in their extensive product lineup are the American Standard 7483.002 and 7483.295, both of which offer remarkable features and technologies designed to enhance both functionality and aesthetic appeal in modern bathrooms.

The American Standard 7483.002, known as the "Cadet" series, is a versatile toilet that embodies efficiency and elegance. One of its standout features is the powerful flushing system, which utilizes American Standard's innovative siphon jet technology. This technology ensures a strong and effective flush every time, minimizing the risk of clogs and reducing water usage. The design of the 7483.002 is sleek and modern, making it a perfect fit for contemporary bathrooms.

Moreover, this model is ADA compliant, making it accessible to individuals with disabilities. The comfortable height of the toilet promotes ease of use, while the elongated bowl provides added comfort. With a water-saving flush that uses only 1.28 gallons per flush, the Cadet series is also environmentally friendly, helping to conserve water without sacrificing performance.

On the other hand, the American Standard 7483.295 is part of the "Hynes" collection, which emphasizes a more stylish and luxurious approach to bathroom fixtures. This model features a high-profile tank and an elegant design that can easily elevate the overall look of any bathroom space. Just like the Cadet series, the 7483.295 is designed with water efficiency in mind, boasting a similar 1.28 gallons per flush capability.

In addition to its aesthetic appeal, the 7483.295 comes equipped with an EverClean surface that helps inhibit the growth of mold and mildew, making maintenance a breeze. This feature is especially valuable in humid environments where cleanliness is a priority.

Both models are constructed with high-quality materials, ensuring durability and longevity. They are designed for easy installation, making them suitable for both DIY enthusiasts and professional plumbers. With American Standard's reputation for excellence and innovation, the 7483.002 and 7483.295 are excellent choices for homeowners looking to upgrade their bathroom fixtures with reliable, efficient, and stylish options. Whether prioritizing performance or design, these models deliver on all fronts, embodying the essence of what modern bathroom solutions should be.
Top Page Image Contents