FLORWELL™
SERVICE SINK
ENAMELED CAST IRON
FLORWELL™ SERVICE SINK
•Enameled cast iron
•3" outlet
•Corner model
❏7741.000 Fixture only - Less rim guard
❏7745.811 Removable vinyl rim guard
Nominal Dimensions: 711 x 711 x 330mm (28" x 28" x 13")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
To Be Specified:
❏Faucet: 8344.112 faucet with top brace, stops, and vacuum breaker
❏Alternative Faucet:
❏Drain: 7721.038 flat grid drain
❏Removable vinyl-coated rim guard: 7745.811 (black)
| 13 | 3/4 |
| (19mm) | |
| (330mm) |
|
13 |
|
|
(330mm) |
| FINISHED WALL |
|
| 28 |
|
| (711mm) |
3/4 |
| NOTE: SUPPLY FITTING CAN BE |
(19mm) | FINISHED WALL | PLACE ON EITHER WALL |
28 | C/L OF |
(711mm) | SPOUT BRACE |
| 8 | 9 |
|
PLAN VIEW | (229mm) |
| |
(203mm) |
|
| |
1/2 NPT |
|
| |
SUPPLIES |
|
| |
| FINISHED WALL |
| |
48 |
|
|
|
(1219mm) |
| 3/4 | |
|
| ||
|
| (311mm) | (19mm) |
| 5 |
|
|
| (127mm) |
|
|
13 |
|
| 1 x 3 |
(330mm) | 8 |
| (25 x 76mm) |
|
| SUPPORTING | |
| (203mm) |
| |
|
| CLEAT ON | |
|
|
| |
|
|
| BOTH WALLS |
ROUGH | 2 | 1/4 (6mm) | |
FLOOR | (51mm) | 3 N.P.T. INSIDE THDS |
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
| M34 |
| |
© 2008 AS America Inc. | Revised 8/05 | ||
|