Installation Instructions
BIDET FITTING | 8391.000 |
| |
with EverClean™ Finish |
|
Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets.
EverClean Finish
•One wipe effortlessly removes spots
•Eliminates the need for cleaners and scrubbing
•Permanent surface protectant remains beautiful for the life of the faucet
•EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless Steel, Polished Brass (or any combination of these finishes)
Certified to comply with ASME A112.18.1M U.S. Patent No. 5,819,789
. 3 & 7
To ensure that your installation proceeds
Required Tools |
|
|
|
| *Wrench |
|
|
Flat Blade Screwdriver | *Hex key |
|
|
| Adjustable Wrench | Channel Locks | 5VCJOH$VUUFS |
|
| ||
Phillips Screwdriver | *Supplied with Fitting |
|
|
Roughing-in Dimensions
TRANSFER VALVE (FOR FLUSHING | ||
| RIM OR SPRAY) | |
BIDET OUTLINE |
| |
IS SYMBOLIC | 7/8 DIA. | |
DOUCHE SPRAY | ADJ. | |
| TO | DIA. |
| ||
DIA. |
| |
|
| |
| FINISHED | |
|
| |
|
| WALL |
|
|
BIDET FAUCET INSTALLATION
CAUTION | Turn off hot and cold water | ||
supplies before beginning. | |||
|
Place MOUNTING NUTS (1) onto the VALVE BODIES
(2)and insert VALVE BODIES (2) through outside holes, from underside of the BIDET LEDGE. Drop the RUBBER RING (3) over the VALVE BODIES (2) and screw on the ESCUTCHEON (4) until it locks against the internal stop.
Tighten the MOUNTING NUT (1) to secure the VALVE BODY (2).
Remove MOUNTING NUT (9), FRICTION RING (10) and UPPER GASKET (7) from TRANSFER VALVE (8) and insert into the center forward hole of BIDET.
Replace UPPER GASKET (7) and FRICTION RING (10). Position the side threaded outlet rearward and secure MOUNTING NUT (9). Thread ESCUTCHEON (5) onto TRANSFER VALVE (8) until it seats against the
BIDET LEDGE.
9
5
8 TO 12
(C) | (H) |
FINISHED
FLOOR
DIVERTER AND
VACUUM BREAKER
ASSEMBLY
FOR GROUND JOINT CONNECTION OR 1/2 " O.D. SLIP (INLETS)
REAR VIEW WITH
WALL REMOVED
10
4
3
BIDET
LEDGE
2
HOTCOLD
17
8