5

Connect the trap to drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area "B") or part of the horizontal leg of the trap (area "C").

Connect hot and cold supply lines between the fitting valve and the supply shut-off valves. Tighten trap joints for watertight assembly. Apply a bead of caulk around the back edge of the sink where it contacts the wall.

C

B

CARE INSTRUCTIONS: Rinse the product clean with clear water. Dry with a soft cotton flannel cloth.

DO NOT: Clean with soaps, acid, polish, abrasives, harsh cleaners, or a cloth with coarse surface.

9420 WASHSTAND REPLACEMENT COMPONENTS LIST

 

PART NO.

PACKED QTY.

DESCRIPTION

 

738747-0200A

1

Front Leg Assembly

 

738748-0200A

1

Rear Leg Assembly

 

738749-0200A

1

Wood Knob

AMERICAN STANDARD ONE-YEAR LIMITED WARRANTY

If inspection of this American Standard plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model.

This warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a local building or plumbing contractor to insure local code compliance before installation.

This warranty shall be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damage; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped by American Standard.

American Standard's option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation, nor shall American

Standard be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or limitation of implied warranties, so this exclusion may not apply to you.)

This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this warranty does not

affect such statutory rights.

AMERICAN-STANDARD WOOD FURNITURE WARRANTY

If inspection of this American-Standard plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American-Standard will repair or, at its option, exchange the product for a similar model. Variations in actual wood color and finishes which may result from natural characteristics of the wood, such as grain patterns, mineral streaks and the like, are not defects and are not covered by this warranty.

This warranty applies only to the original purchaser and installation of these products.

This limited warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a local building or plumbing contractor to insure local code compliance before installation.

This warranty shall be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damages; if it was not installed in accordance with American-Standard’s instructions; or if it has been modified in a manner inconsistent with the product as shipped by American-Standard.

American-Standard’s option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation, nor shall American-Standard be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or limitation of implied warranties, so this exclusion may not apply to you).

This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or province to province, in which case this warranty does not affect such statutory rights.

For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or through whom the product was purchased, or that a service request (including a description of the product model and of the defect) be sent to the following address:

In the United States:

American Standard Inc.

P.O. Box 6820

Piscataway, New Jersey 08855

Attention: Director of Consumer Affairs

For residents of the United States, warranty information may also be obtained by calling the following toll free number: (800) 442-1902

 

In Canada:

 

 

In Mexico:

 

American Standard

Customer Service Manager

2480 Stanfield Rd.

Ideal Standard, S.A. de C.V.

Mississauga, Ontario

Via Morelos #330

Canada L4Y 1S2

Col. Santa Clara

Toll Free: (800) 387-0369

Ecatepec 55540 Edo. Mexico

 

 

 

- 3 -

7 3 0 8 0 4 - 1 0 0

Page 3
Image 3
American Standard 9422.020 installation instructions Packed QTY Description, American Standard ONE-YEAR Limited Warranty

9422.020 specifications

The American Standard 9422.020 is a well-regarded bathroom fixture that has gained popularity for its blend of functionality, efficiency, and modern design. This model features a sleek, minimalist look that complements various bathroom styles, making it a versatile choice for both contemporary and traditional settings.

One of the standout characteristics of the American Standard 9422.020 is its integrated flush valve technology. This feature is designed to ensure a powerful and efficient flush while using minimal water, which helps conserve resources and reduce utility bills. The high-efficiency design boasts a 1.28 gallons per flush (GPF) rating. This not only promotes sustainability but also meets the standards set by the Environmental Protection Agency’s WaterSense program, enhancing its appeal for environmentally-conscious consumers.

The toilet is crafted from vitreous china, a robust material known for its durability and ease of cleaning. It features a smooth, high-gloss finish that withstands stains and scratches, ensuring that the toilet remains visually appealing even after years of use. The toilet’s bowl is elongated, which provides additional comfort for the user, making it a preferred choice for many households.

Another significant highlight of the American Standard 9422.020 is its EverClean surface. This innovative coating inhibits the growth of bacteria, mold, and mildew on the surface of the toilet, enhancing hygiene and reducing the need for harsh cleaning products. This feature not only contributes to a cleaner bathroom environment but also extends the lifespan of the toilet.

Installation is made straightforward with the American Standard 9422.020, thanks to its standard sizing and mounting options. This makes it a practical choice for both DIY enthusiasts and professional plumbers alike. Furthermore, the toilet tank is designed to be quiet, minimizing noise disruption in the bathroom.

In summary, the American Standard 9422.020 combines elegant design with advanced technologies to deliver an efficient, comfortable, and eco-friendly toilet solution. Its modern features and durable construction make it a reliable choice for homeowners looking to upgrade their bathrooms or build new ones.