3

4

Press firmly.

5

6

Apply weight evenly. Do not move after placement. Water tight seal may break.

9

Thread, then

 

hand tighten

water supply.

7

!Hand Tighten Only. Do Not Overtighten.

Tighten handles alternately

10 until tank contacts bowl.

HAND TIGHTEN ONLY!

TIP: Place 2 pieces of masking tape on floor (as shown) to help with alignment in step 6.

8

*For seat installation,

see instructions

included with seat.

!WARNING:

Overtightening of water supply line nuts could result in breakage and potential flooding. If the connection leaks after hand tightening, replace the supply line. Do not use any type of sealant on the water supply connection.

!Use of plumber’s putty, pipe dope, or any other type of sealant will void the warranty.

- 2 -

7301555-100 Rev. B

Page 2
Image 2
American Standard 2989, 2988, 2984, 2985, 2795, 2794 Hand Tighten Only. Do Not Overtighten, Press firmly