American Standard 3351.001, FLUSHOMETER TOILET SYSTEM with EVERCLEAN dimensions N64

AFWALL® 1.6 GPF

FLUSHOMETER TOILET SYSTEM

	with EVERCLEAN®
BARRIER FREE	MANUAL FLUSH VALVE

	FINISHED WALL
		660mm			356mm
					(14")
	73mm	(26")
				SUPPLY	108 -133mm
	(2-7/8")				(4-1/4" to 5-1/4")
			DN 25mm
			(1" I.P.S.)
343mm		470mm					ROUGH-IN
(13-1/2")					-C-L-		DIMENSION
		(18-1/2")			*CRITICAL		293mm
		C/L OF SEAT POST					(11-1/2")
19mm					LEVEL
		HOLES 140 mm
(3/4")
		(5-1/2") CENTER
95mm		330mm		(4x)	229mm
(3-3/4")				22mm
		(13")				191mm
			381mm	(7/8")	(9")
						(7-1/2")
			(15")	HOLES
70mm		FINISHED		C/L OF		133mm
						(5-1/4")
(2-3/4")		FLOOR		OUTLET
133mm
(5-1/4")	32 mm
	(1-1/4")		*Note: The Critical Line (-C-L-) on Vacuum Breaker
			must typically be a minimum of 6" (152mm) above
			fixture. Consult Codes for details.

Valve Left or Right Hand Installation

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND

FACILITIES - CHECK LOCAL CODES.

When installed so that top of seat is 432 to 483mm (17" to 19") from the finished floor.

NOTES:

WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING

NOT RECOMMENDED).

SUGGESTED 2mm (1/16) CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL.

TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON

THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR

SUPPLY ROUGHING.

CARRIER FITTING AS REQUIRED TO BE FURNISHED BY OTHERS.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORT.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages

N64

© 2011 AS America Inc. Revised 11/11