6 TEST INSTALLED FITTING
With HANDLE (1) in OFF position, turn on | 1 | |
WATER SUPPLIES (2) and check all |
| |
connections for leaks. |
| |
Remove AERATOR (3). |
| |
Operate HANDLE (2) up and down, in COLD and HOT |
| |
positions, to flush water lines thoroughly. | 3 | |
Direct SPRAY HEAD (3) into sink. Open faucet and | ||
| ||
activate spray. Check SPRAY HOSE (4) connections |
| |
for leaks. |
| |
Replace AERATOR (3). |
|
2
7 ADJUST HOT LIMIT STOP
By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP reduces risk of accidental scalding. To set the maximum hot water temperature of your faucet, all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP (1).
Use a flat blade screwdriver or your fingers to pull up and rotate red HOT LIMIT SAFETY STOP (1). Follow Step "A" or
"B" to adjust min./max. discharge temperature. "0" being the hottest to "7" the coldest temperature setting. Factory set at "0".
"A"
TEMPERATURE
SETTING NUMBERS
"B"
PRY RED RING FORWARD |
| |
AND ROTATE CLOCKWISE | "B" | |
"B" | ||
| ||
ADJUSTMENT WHEN |
| |
WATER IS TOO COLD |
|
PRY RED RING FORWARD AND ROTATE COUNTER- CLOCKWISE ONE CLICK
"A"
0
1
2
3
4
5 6
"A"
ADJUSTMENT WHEN WATER IS TOO HOT
1
8 CARE INSTRUCTIONS:
"RED RING"- HOT LIMIT SAFETY STOP
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.
M66240 REV.1.1
