7 GENERAL CLEANING; Fig. 7
1.For general cleaning use a damp, soft cloth to clean the spout and the sensor.
2.For cleaning dirt use a soft cloth with diluted dish washing detergent. Wipe the area using a wet cloth and dry using a soft cloth.
CAUTION
Do not scratch the sensor when cleaning.
Avoid using anything that may scratch the spout surface. Never use polishing power, detergent or a nylon scrub brush. They will damage the surface of the spout or Sensor.
Fig.7
FAQ'S
Q: How will I know if battery needs to be replaced? | Q: Why does the faucet operate the opposite of |
A: Valve does not open and sensor blinks 2 times | |
interrupted by pause for up to 7 days. | turns off when in sensor range? |
| A: Sensor wires to solenoid are reversed. Black to - |
Q: Why has the flow rate of the faucet reduced | & Red to + is correct. |
significantly? |
|
A: Check and clean aerator and strainer. | Q: What is the normal operating pressure range? |
| A: Faucet will operate with supply pressures ranging |
Q: There is no flow out of faucet when I'm in the | from |
sensor range? |
|
A: Check sensor. If sensor blinks 2 times interrupted |
|
by pause, replace battery, or call |
|
9
