American Standard R125SS, R120SS dimensions Upgradable, Pressure Balance Bath/Shower Fitting

					UPGRADABLE
					PRESSURE BALANCE BATH/SHOWER FITTING
					VOLUME AND TEMPERATURE CONTROL VALVE
					MODEL NUMBER:
					R120 Pressure Balance Rough Valve Body only
					Direct sweat inlets/outlets. LESS trim.
					R120SS Pressure Balance Rough Valve Body only
Available Trim Kits					with Screwdriver stops
					Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
Colony Soft	Princeton	Reliant+	Reliant 3	Seva	R125 Pressure Balance Rough Valve Body only
					Female thread inlets/outlets. LESS trim.
					R125SS Pressure Balance Rough Valve Body only
Ceramix	Standard	Jasmine	Tendence		with Screwdriver stops
					Female thread inlets/outlets. Screwdriver stops. LESS
					trim.
					See reverse for available trim kits.
R120 Valve Body Shown

GENERAL DESCRIPTION:

Cast brass body, washerless 47mm ceramic disc valve cartridge with volume and temperature control, and hot limit safety stop. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. One-half inch inlets and outlets (choice of direct sweat or threaded). Available with screwdriver stops. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Valve body will accept a variety of decorative Bath/Shower trim kits.

PRODUCT FEATURES:

Cast Brass Valve Body: Durable - Quality that will last a lifetime. Ideal material for prolonged contact with water.

Ceramic Disc Valve Cartridge: Assures a lifetime

of drip-free performance. Allows easy control over both water temperature and volume.

Pressure Balancing Valve Cartridge: Maintains

constant output temperature in response to changes in relative hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow. Avoids failure due to mineral deposits - ideal for use in hard water.

Adjustable Hot Limit Safety Stop: Limits the

amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Exclusive Plaster Guard: Plaster guard is designed

to protect valve during installation and serve as a mounting plate for thin-wall installations. Two piece design allows valve to be tested prior to trim installation.

Wide Rough-in Range: From 1-5/8" to 3-1/4".

	41mm TO 83mm
FINISHED WALL	(1-5/8 TO 3-1/4)	VALVE BODY
	1/2" NPT	OPTIONS
		INLETS
		103 mm
	SHR. 1/2" NOM.	(4-1/16")
	COPPER SWEAT	51.5 mm
	INLETS 1/2" NOM.	(2-1/32")
	COPPER SWEAT
		103 mm
		(4-1/16")
	TUB 1/2" NOM.
	COPPER SWEAT
		SWEAT (R120)
OPTIONAL TO FINISHED		149 mm
		(5-7/8")
FLOOR USUALLY
BETWEEN 1651mm (65)	SHR. 1/2" NOM.	51 mm
AND 1981mm (78)	COPPER SWEAT	(2")
	INLETS	103 mm
	1/2" NPT
		(4-1/16")
	TUB 1/2" NOM.
	COPPER SWEAT
	SWEAT (STOPS) (R120SS)
		SHR
		1/2" NPT
	INLETS
OPTION 457 mm	86 mm
	(3-3/8")
(18")
	86 mm
	(3-3/8")
		INLETS
25mm		1/2" NPT
(1 MIN.)		TUB PORT
		1/2" NPT
	THREADED (R125)
		149 mm
		(5-7/8")
1/2"
COPPER	SHR.	86 mm
102 mm	1/2" NOM.	(3-3/8")
	COPPER
(4")	SWEAT
TOP OF TUB RIM	TUB 1/2" NOM.
	COPPER SWEAT
		INLETS 1/2" NPT
	THREADED (STOPS) (R125SS)

BOTTOM OF TUB

SUGGESTED SPECIFICATION:

Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R12____, Trim Kit - American Standard Model # ____.____.

B7

© 2006 American Standard Inc.