American Standard dimensions Ravenna Right Height Toilet, Bowl 4096.016 Tank Alternate Tank

RAVENNA™ RIGHT HEIGHT™ TOILET

❑2646.016

•Vitreous china

•Low-consumption (6.0 Lpf/1.6 gpf)

•Elongated siphon action jetted bowl

•16-1/2" Rim height for accessible applications

•Fully glazed 2" trapway

•AquaForce fl ushing technology

•Styled tank w/fi tted tank cover

•Chrome trip lever

•Speed Connect™ tank/bowl coupling system

•Sanitary bar on bowl

•2 color matched bolt caps

•100% factory fl ush tested

•Design coordinated to Ravenna pedestal lavatory

❑3417.016 Bowl

❑4096.016 Tank

Alternate Tank:

❑4096.516 with Aquaguard tank liner

Nominal Dimensions:

756 x 476 x 787mm

(29-3/4" x 18-3/4" x 31")

Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specified:

❏Color:

❏Seat: American Standard #5324.019 “Rise and Shine" solid plastic, closed front, elongated seat with cover.

❏Seat: American Standard #5311.012 “Laurel" molded closed front seat with cover.

❏Alternate Seat:

❏Supply with stop:

© 2006 American Standard Inc.

RAVENNA™

RIGHT HEIGHT™ TOILET

VITREOUS CHINA

FINISHED WALL
		756mm
		(29-3/4)
19mm ± 6mm				476mm
(3/4 ± 1/4)
	222mm			(18-3/4)
	(8-3/4)
		470mm
		(18-1/2)		C/L
		C/L OF SEAT POST HOLES
		140mm (5-1/2 CENTERS)
				787mm
			SUPPLY	(31)
			AS
83mm 1/4)-(3			REQ'D
			419mm
			(16-1/2)
			*222mm(8-3/4)	381mm
				(15)
			152mm
	16mm		(6)
	(5/8)		FINISHED
178mm	305mm		FLOOR	241mm
(7)		(12)		(9-1/2)
305mm	C/L OF OUTLET
(12)

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

K62

Revised 5/05