American Standard SPS 2774E, 2774EC CADET ELITE 6’ x 42”, Whirlpools By American Standard

CADET ELITE™ 6’ x 42”

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

					PROVIDE ACCESS TO PUMP FOR
					SERVICING ON ALL INSTALLATIONS
					1829 mm
			305 mm	(72)
				RECOMMENDED FITTING LOCATION
229mm		(12)
					64 X 330mm (2-1/2 x 13")
(9)
	19 mm				FOR PIER OR ISLAND
	(3/4)				INSTALLATIONS ONLY

SEE FITTING SPECS FOR DIMENSIONS

FINISHED

WALL

229mm

(9)

1067mm						ON/OFF
					PUMP	SWITCH
(42)		CUTOUT IN FLOOR
533mm
		FOR DRAIN
(21)
C/L OF	57mm				(2) AIR VALVES	OUTLINE OF CUTOUT
SUPPLIES	(2-1/4)		(8) JETS	ALT. FITTING		1791mm x 1029mm
						(70-1/2 X 40-1/2)
	C/L OF DRAIN		LOCATION #1
					C/L OF
					SHOWER ARM
OPTIONAL TO
FINISHED FLOOR					C/L OF
USUALLY BETWEEN
1651 & 1981mm					VALVES	IN-LINE HEATER
(65 & 78)	C/L OF
						REMOVABLE
					C/L OF
	OVERFLOW		305mm			BLANK
					SPOUT
	38mm		(12)
	(1-1/2)
			102mm			■ LEVELING
	89mm
						STRINGER
	(3-1/2)		(4)
						NOT FOR
						SUPPORT
	502mm
	(19-3/4)					464 mm
	ROUGH					(18-1/4)
	FLOOR
	INTEGRAL		1-1/2 N.P.T.M.		70 mm
	SUPPORT		THREADS
	FEET	1-1/2 O.D.TAILPIECE			(2-3/4)
					117 mm
					(4-5/8)

GENERAL SPECIFICATIONS FOR 2774E WHIRLPOOL

INSTALLED SIZE					72 x 42 x 19-3/4 In.
		(1829mm x 1067 mm x 502mm)
WEIGHT						137 Lbs. (62 Kg.)
WEIGHT w/WATER						821 Lbs. (372 Kg.)
GAL. TO OVERFLOW							82 Gal. (310 L.)
MIn. OPERATING GAL.							66 Gal. (256 L.)
BATHING WELL AT SUMP		50 x 27 In. (1270 mm x 686 mm)
BATHING WELL AT RIM			65 x 33 In. (1651 x 838mm)
WATER DEPTH TO OVERFLOW							13 In. (330 mm)
FLOOR LOADING		42 Lbs./Sq. Ft. (203 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.								27.8
CUBE (FT3)								55.5
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP				2.1 HP, 14.4 AMPS, 120V.

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 3 WALL TILING BEAD KIT No. TILE-BEAD AND APRON No. 6FT-APRON AVAILABLE AND MUST BE ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT:

Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

© 2003 American Standard Inc.