1INSTALL VALVE TRIM
Figure 1. Remove plaster guard from valve. Push CAP (1) over VALVE CARTRIDGE (2) until seated against stop.
Figure 2. Push ESCUTCHEON HOLDER (3) onto CAP (1) and attach with LONG SCREWS (4). Mount ESCUTCHEON SUPPORT (5) to ESCUTCHEON HOLDER (3) with 4 SHORT SCREWS (6).
Figure 3. Align PINS (7) on back side of ESCUTCHEON (8) with the FOUR HOLES (9) in ESCUTCHEON SUPPORT (5) and press ESCUTCHEON (8) flush against finished wall.
1
3
5
4
Figure 2.
6
PLSTER | 1 |
GUARD | |
Figure 1. | 2 |
| |
9 |
|
5 |
|
| 7 |
| 8 |
Figure 3. |
|
2INSTALL TUB SPOUT, SHOWER HEAD, SHOWER ARM WITH FLANGE
CAUTION: Protect finish on SHOWER HEAD and TUB SPOUT when installing.
Remove pipe cap and plug from shower and tub rough piping.
Slip TUB SPOUT (1) onto tub nipple and tighten with 4mm Hex Wrench.
CAUTION: Protect finish on TUB SPOUT when installing.
Install SHOWER ESCUTCHEON (2) onto SHOWER
ARM (3). Apply sealant or Teflon tape to threads on 4 both ends of SHOWER ARM (3) and thread longer
leg of SHOWER ARM (3) into shower elbow.
Thread SHOWER HEAD (4) onto SHOWER ARM (3).
CAUTION: Protect finish on SHOWER HEAD and ARM when installing.
2
3
SHR.
ELBOW
PIPE
PLUG
PIPE
CAPTUB FILLER NIPPLE
1
4MM HEX WRENCH
M968636 Rev 1.1