| Installation | |
DECK MOUNT | Instructions | |
T028.990 | ||
TUB FILLERS |
DAZZLE DIVERTER & PERSONAL
SHOWER TRIM KITS with EverClean™ Finish
Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets.
EverClean Finish
•One wipe effortlessly removes spots
•Eliminates the need for cleaners and scrubbing
•Permanent surface protectant remains beautiful for the life of the faucet
•EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless Steel, Polished Brass (or any combination of these finishes)
Certified to comply with ANSI A112.18.1 U.S. Patent No. D403,750M968499 Rev. 1 . 1
To ensure that your installation proceeds
1 INSTALL HANDLE ADAPTER
Remove DIVERTER GUARD (1) from valve.
Place the ESCUTCHEON SEAL (7) into groove of DECK ADAPTER (2).
Align the HANDLE STEM (3) with the SLEEVE (4) as necessary.
Thread the HANDLE ADAPTER (5) into the VALVE BODY (6) until the DECK ADAPTER (2) contacts tight against the finished mounting surface.
4
3
2
GROOVE7
5
1
6
2 INSTALL HANDLES
| Turn VALVE STEM (2) fully clockwise (Tub fill position). |
| |
| Push ADAPTER (1) on VALVE STEM (2), so that the hole of the |
| |
| ADAPTER (1) without a spline is facing up. See figure "A". Tighten |
| |
| STEM SCREW (3) to secure ADAPTER (1). | 4 | |
| ||
| Find correct position of LEVER HANDLE ASSEMBLY (4) by adjusting | THREAD ON | |
| TO DECK | ||
| male teeth on ADAPTER (1) to female teeth in HANDLE (4). | ADAPTER | |
| TOP | |
| Thread LEVER HANDLE ASSEMBLY (4) onto DECK ADAPTER (5) until |
| |
| snug against mounting surface. |
| |
| Figure "A" | 1 | |
3 | ||
| ||
| 2 | |
| SPLINE END DOWN | 5 |
