American Standard T038.900 installation instructions Deck Mount, TUB Systems, Spout Installation

Installation Instructions

DECK MOUNT	T038.900
TUB SYSTEMS

TROPIC TRIM KIT

with EverClean™ Finish

Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets.

EverClean Finish

•One wipe effortlessly removes spots

•Eliminates the need for cleaners and scrubbing

•Permanent surface protectant remains beautiful for the life of the faucet

•EverClean™ available on: Polished Chrome, Satin Nickel,

Stainless Steel, Polished Brass (or any combination of these finishes)

Certified to comply with ANSI A112.18.1 U.S. Patent No. D403,750

M968896

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

Required Tools

	Phillips Screwdriver
	Adjustable Wrench	Channel Locks
Drill with 3/16" bit	Flat Blade Screwdriver

1 SPOUT INSTALLATION

Complete FINISHED DECK before trim installation.

Turn off the water supplies.

Remove the GUARDS (1) from the VALVE BODIES (2). Remove the GUARD (3) and 1/4" PLUG (4) from the SPOUT SHANK (5).

The SPOUT SHANK (5) height should be 1" to 2" above the FINISHED DECK. Cut the SPOUT SHANK (5) if necessary. Remove all burrs and bevel the end of the shank. Failure to do so may damage the SPOUT O-ring during installation and cause water leakage.

Drill a 3/16" hole in the finished deckfor spout locking pin. See TEMPLATE for location.

5

1

FINISHED

DECK

3

4

1

REMOVE ALL

BURRS AND

BEVEL

1"- 2"

			8.4mm
	(21/64")
		3/16" DIA. HOLE
19.8mm
			18.6mm DIA.
(23/32")
	(47/64")
			SPOUT SHANK

TEMPLATE FOR

SPOUT ROLL

PIN LOCATION

2

5

3/16" DRILLED HOLE

FRONT