1A | SPOUT INSTALLATION | 9 | 6 |
|
Lubricate the SPOUT ADAPTER
Push SPOUT ADAPTER (8) on SPOUT SHANK (5) and align slot in SPOUT ADAPTER (8) with 3/16" drilled hole.
Tighten SPOUT ADAPTER SET SCREW (9) securely with 4mm HEX KEY (10) supplied.
Position the RUBBER RING (14) in the groove in the base of the ESCUTCHEON (11). Push the SPOUT (12) with ESCUTCHEON (11) down onto the SPOUT ADAPTER (8) and tighten the SET SCREW (13) securely with the 5mm HEX
KEY (15) supplied.
10
FINISHED SLOT DECK
3/16" DRILLED HOLE
8
7
15
12
5
13
11
11
GROOVE
14
8
7
2 INSTALL HANDLE ADAPTERS
3
Place the ESCUTCHEON SEALS (1) into groove of DECK ADAPTERS (2). 2
Align the HANDLE STEM (3) with the SLEEVE (4) as necessary. | GROOVE |
|
Thread the HANDLE ADAPTER (5) into the VALVE BODY (6) until the
DECK ADAPTERS (2) contacts tight against the finished deck.
1
4
5
6
3 INSTALL HANDLES
Push ADAPTER (1) on VALVE STEM (2), so that the hole of the
ADAPTER (1) without a spline is facing up. See figure "A". Tighten
STEM SCREW (3) to secure ADAPTER (1).
Find correct position of LEVER HANDLE ASSEMBLY (4) by adjusting |
| |
male teeth on ADAPTER (1) to female teeth in HANDLE (4). |
| 4 |
|
| |
Thread LEVER HANDLE ASSEMBLY (4) onto DECK |
| THREAD ON |
| TO DECK | |
ADAPTER (5) until snug against mounting surface. | TOP | ADAPTER |
| ||
Repeat steps for opposite handle. |
| |
|
| |
Figure "A" |
| 1 |
| 3 | |
|
| |
|
| 2 |
SPLINE END DOWN |
| 5 |
M968896
