T373.740

Installation

Instructions

ENFIELDT373.742

BATH/SHOWERT373.741 TRIM KITS

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

Certified to comply with ANSI A112.18.1

M 9 6 8 2 9 4 R E V 1 . 1

ATTENTION:

If TRIM T373.742 or diverter tub spout is used make sure TWIN ELL (B) P/N 8888.120 is connected to valve body as indicated in roughing- in sketch.

TWIN ELL

TWIN ELL P/N 8888.120 can be ordered as shown in the American Standard List Price Book

ROUGHING-IN DIMENSIONS

Installation for Bath/Shower,

Shower only, or Valve only Trim.

Dimensions are for reference.

	FINISHED WALL
1/2" NPT	1" MIN.
	1" MIN.
		5-1/8" REF.
	7-7/8" REF.
		OPTIONAL TO FINISHED
		FLOOR USUALLY
		BETWEEN 74'' AND 80''
		FOR HEAD CLEARANCE
9-1/2"	4"
9-1/2"
	18" OPTIONAL
	1" MIN.
4"
1/2" NPT	5-3/4" REF.	TOP OF
1/2" NPT	5-3/4" REF.	TUB RIM
		TUB RIM

BOTTOM OF TUB

Required Tools

Phillips Screwdriver

Flat Blade Screwdriver

Adjustable Wrench

Channel Locks

1	TRIMINSTALL	CAUTION: Protect finish on SHOWER ARM,
		SHOWER HEAD and TUB SPOUT when installing.

When finished tiling the wall, remove PLASTER GUARD (A) and turn off water supply.

Attach STEM ADAPTER (1) to TEMPERATURE CONTROL (2) valve stem with SELF TAPPING SCREW (3). Attach HANDLE SCREW (4) to VOLUME CONTROL ADAPTER (5).

Push CAPS (6) onto TEMPERATURE CONTROL (2) and VOLUME CONTROL ADAPTER (5).

Mount ESCUTCHEON (7) to valve body with SCREWS (8).

Push DIAL PLATE (9) over CAPS (6) and into the four alignment holes in ESCUTCHEON (7) and snap into place.

Remove PIPE CAP (10) and PIPE CAP (11) from shower pipe and tub filler pipe.

Install SHOWER ARM (17) with SHOWER ARM ESCUTCHEON (18), SHOWER HEAD (12) and TUB FILLER SPOUT (13) by threading onto pipe nipples. Use teflon tape or pipe sealant on pipe threads.