American Standard 2742.XXXX installation instructions Xxxx Series Whirlpool / Bathing Pool

TOWN SQUARE® 6' x 42"™

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

INSTALLATION INSTRUCTIONS

2742.XXXX SERIES WHIRLPOOL / BATHING POOL

4"		71-1/2"		3"
		(1816mm)
(102mm)			INTEGRAL
	35-3/4"			(76mm)
			FITTING DECK
13-1/4"	(908mm)
			3" X 14"
(337mm)	C/L OF DRAIN OUTLET
			(76 X 356mm)
				EDGE OF
				FLOOR
				CUTOUT
41-3/4"	26-3/4	FLOOR CUTOUT		PROVIDE ACCESS
				TO PUMP FOR
(1060mm)	(679mm)	5" X 15"
				SERVICE ON ALL
		(127 X 381mm)
				INSTALLATIONS
3/4"				PUMP
(19mm)				ON/OFF
				SWITCH
	SUCTION		JETS (8)	OUTLINE OF CUTOUT
				70" X 40-1/4"
	SAFE-T-
				(1778 X 1022mm)
	HEATER
	REMOVABLE
	BLANK	LEVELING STRINGER
2"				C/L OF
		(NOT FOR SUPPORT)
(51mm)	PUMP			OVERFLOW
			3-1/4"	22"
				(559mm)
			(83mm)
				20"
			ROUGH
				(508mm)
INTEGRAL			FLOOR
FEET
SUPPORT
	1-1/2" N.P.T. THREADS
	1-1/2" O.D.TAILPIECE		5/8"	3"
			(16mm)	(76mm)

GENERAL SPECIFICATIONS FOR 2742 WHIRLPOOL

INSTALLED SIZE	71-1/2 x 41-3/4 x 22 In. (1816 x 1060 x 559mm)
WEIGHT			115 Lbs. (52 Kg.)
WEIGHT w/WATER			690 Lbs. (313 Kg.)
GAL. TO OVERFLOW			69 Gal. (261 L)
WHIRLPOOL MIN. OPERATING VOL.			60 Gal. (227 L)
BATHING WELL AT SUMP		41 x 21-1/2 In. (1041 x 546mm)
BATHING WELL AT RIM		62 x 31-1/2 In. (1574 x 800mm)
WATER DEPTH TO OVERFLOW			14-1/4 In. (362mm)
FLOOR LOADING			33 Lbs./Sq.Ft. (163 Kgs./Sq.m)
(PROJECTED AREA)
PTS.				27.8
CUBE (FT3)					55.7

WHIRLPOOL ELECTRICAL SPECIFICATIONS

WHIRLPOOL PUMP 2.1 HP, 14.4 AMPS ,120V.

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

• Safe-T-Heater 9075.120*

List of Required Components (not included):

•Drain 1594.170

•Bath Filler

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	20 amp GFI Outlet
•	Personal Safety	•	Cement, Plaster,
	Equipment		Grout
•	Caulking Gun

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others.

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© AS America Inc. 2009

753027-100 REV. FAll product names listed herein are trademarks of AS America Inc. unless otherwise noted.