American Water Heater (A)BCG3 85T500-8P, (A)BCG3 85T500-8N manual

COMMERCIAL STORAGE TANK warranty

A.WHO IS COVERED

AMERICAN WATER HEATER COMPANY, (herein collectively referred to as “Manufacturer”) warrants only to the original purchaser (hereinafter “Owner”) of the storage tank for the period specified below. This warranty is not transferable. The warranty is restricted to the storage tank used in a commercial application in the United States of America.

B.WHEN IT IS COVERED

The storage tank is warranted only when it is installed, operated and maintained in accordance with the printed instructions accompanying the storage tank. A storage tank should be installed in such a manner that, if the tank or any connection thereto should leak, the resulting flow of water will not cause damage to the area in which it is installed. A systems temperature and pressure relief valve must be piped to the nearest drain to avoid damage in the event the valve is actuated. For detailed instructions read the manual accompanying the water heater and review drawings in the manual.

C.WHAT THE MANUFACTURER WILL DO AND THE PERIOD OF COVERAGE

1.The Inner Tank - If the inner tank leaks within three years after the original installation, Manufacturer will furnish a new storage tank of Manufacturer’s then prevailing comparable model. If industry standards, product improvements or product obsolescence prohibits Manufacturer from furnishing an identical model replacement water heater under this warranty, the Owner will be furnished with a new storage tank of comparable capacity; however, the Owner will be charged for the additional value of the item(s) which Manufacturer has incorporated in the replacement storage tank. A prior authorization number must be obtained from the Manufacturer before replacing the storage tank. This warranty is limited to one replacement storage tank at the original installation site.

2.Component Part - If any component part other than the inner tank proves to Manufacturer’s satisfaction to be defective in material or workmanship within one year after original installation, the Manufacturer will furnish the Owner with a replacement for the defective part(s). This warranty is limited to one replacement component part for each original part.

3.Return of Defective Storage Tank and Component Parts - Manufacturer reserves the right to examine the alleged defect in the storage tank or component part(s), and it will be the Owner’s obligation (see paragraph D.5) to return the storage tank and/or component part(s) to the Manufacturer.

a.When returning a storage tank it must include ail component parts and the data plate label.

b.When returning component part(s), they must be individually tagged and identified with the storage tank’s product number, model number, serial number, date of purchase and date of installation.

D.WHAT THIS WARRANTY DOES NOT COVER

1.THE LIMITED WARRANTY STATED HEREIN IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED (WHETHER WRITTEN OR ORAL), INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

2.MANUFACTURER SHALL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL OR CONTINGENT DAMAGES OR EXPENSES, ARISING, DIRECTLY OR INDIRECTLY, FROM ANY DEFECT IN THE STORAGE TANK OR THE USE OF THE STORAGE TANK.

3.Manufacturer shall not be liable for any water damage arising, directly or indirectly, from any defect in the storage tank or component part(s) or from its use.

4.Manufacturer shall not be liable under this warranty and this warranty shall be void and have no effect if the following events occur:

a.The storage tank or any of its component parts have been subject to misuse, alteration, neglect or accident; or

b.The storage tank has not been installed in accordance with the applicable local plumbing and/or building code(s) and/or regulations; or

c.The storage tank is not installed, operated and maintained in accordance with the printed Manufacturers instructions; or

d.The storage tank or any part has been under water; or

e.The storage tank is exposed to highly corrosive atmospheric conditions; or

f.The storage tank is not continuously supplied with potable water; or

g.The storage tank replacement is requested for reasons of noise, taste, odor, discoloration and/or rust; or

h.The storage tank is not operated within the factory calibrated temperature limits; or

i.The storage tank is supplied or operated with desalinated (deionized) water; or

j.The storage tank is removed from its original installation location; or

k.The storage tank is installed outdoors (this storage tank is intended only for indoor installation); or

l.The storage tank or any of its component parts fail due to lime and/or sediment build-up; or

m.The storage tank does not have installed a temperature and pressure relief valve, certified to ANSI Z21.22 and approved by the American Society of Mechanical Engineers; or

n. The storage tank or any of its component parts fail because of fire, floods, lightening, or any other act of God; or o. The storage tank is installed in a closed system without adequate provision for thermal expansion.

5.Except when specifically prohibited by the applicable state law, the Owner, and not the Manufacturer, shall be liable for and shall pay for all charges for labor or other expenses incurred in the removal, repair or replacement of the water heater or any component part(s) claimed to be defective or any expense incurred to remedy any defect in the product. Such charges may include, but are not necessarily limited to:

a.All freight, shipping, handling and delivery costs of forwarding a storage tank or replacement part(s) to the owner.

b.All costs necessary or incidental in removing the defective storage tank or component part(s) and installing a new storage tank or component part(s).

c.Any material required to complete, and/or permits required for, installation of a new storage tank or replacement part(s), and

d.All costs necessary or incidental in returning the defective storage tank or component part(s) to a location designated by the manufacturer.

6.The terms of this Limited Warranty cannot be modified by any person, whether or not he/she claims to represent or act on behalf of the Manufacturer.

E.HOW STATE LAW MAY RELATE TO THIS WARRANTY

Some States do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you. Similarly, some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Further, this warranty gives you specific legal rights and you may also have other rights, which may vary from State to State.

F.HOW THE ORIGINAL OWNER CAN MAKE A WARRANTY CLAIM

1.The Owner should submit the warranty claim directly to Manufacturer’s Service Department, at the address or phone number listed below, and Manufacturer will arrange for the handling of the claim and if valid, will give the Owner an authorization number which must appear on any document presented for warranty exchange.

2.Whenever any inquiry or request is made, be sure to include the storage tank’s product number, model number, serial number, date of purchase, date of installation, maintenance records, and location of installation.

FOR TECHNICAL ASSISTANCE, SERVICE OR WARRANTY INFORMATION

PHONE TOLL FREE: 1-800-456-9805

MONDAY THROUGH FRIDAY 8:00 AM to 8:00 PM EASTERN STANDARD TIME

OR Write to:

American Water Heater Company ATTN.: PRODUCT SERVICES COMMERCIAL DEPARTMENT

P.O. BOX 1597 JOHNSON CITY, TN 37605-1597

(A)BCG3 85T500-8N, (A)BCG3 85T500-8P specifications

American Water Heater has long been a trusted name in the industry, providing high-quality solutions for residential and commercial water heating needs. Among its impressive lineup of products, the (A)BCG3 85T500-8P and (A)BCG3 85T500-8N models stand out due to their outstanding efficiency, performance, and innovative technologies.

These water heaters are primarily classified as high-efficiency gas water heaters, designed to meet a variety of usage demands. With a robust design and advanced technological features, they cater to homes and businesses that require reliable and energy-efficient hot water solutions.

One of the most notable features of the (A)BCG3 85T500-8P and (A)BCG3 85T500-8N models is their remarkable thermal efficiency. They are engineered to optimize energy usage, which not only helps reduce utility bills but also minimizes environmental impacts. This energy efficiency is achieved through advanced insulation and heat exchange technologies that maintain water temperature with minimal energy expenditure.

Both models come equipped with a powerful gas burner that allows for rapid heating, making them ideal for high-demand scenarios. The innovative burner technology ensures even heat distribution, significantly reducing recovery time and ensuring that hot water is available whenever needed.

In terms of safety, American Water Heater has incorporated several features to protect users and the unit itself. These include safety shut-off valves and temperature control features that prevent overheating and provide peace of mind.

Durability is another hallmark of these models. Constructed with high-quality materials, they resist the wear and tear commonly associated with traditional water heaters. Furthermore, the design of the (A)BCG3 85T500-8P and (A)BCG3 85T500-8N emphasizes ease of maintenance, allowing for simpler servicing and reduced downtime.

Finally, both models are backed by American Water Heater's commitment to customer satisfaction, supported by comprehensive warranties and reliable customer service. This assurance adds value to their products, making them a preferred choice for consumers seeking efficient and dependable water heating solutions.

In conclusion, the (A)BCG3 85T500-8P and (A)BCG3 85T500-8N models exemplify American Water Heater’s dedication to innovation and efficiency, making them excellent options for anyone in need of advanced water heating technology.

American Water Heater (A)BCG3 85T500-8P For Technical ASSISTANCE, Service or Warranty Information

Models: (A)BCG3 85T500-8N (A)BCG3 85T500-8P