American Water Heater NRGSS01010 warranty Residential High Efficiency Gas

Residential High Efficiency Gas

MODEL

GALLON

ENERGY

BTU INPUT

RECOVERY

FIRST

FOAM

DIMENSIONS IN INCHES

DRAFT

SHIPPING

AT 90°

HOUR

THICKNESS

HOOD

WEIGHT

NUMBER

CAPACITY

FACTOR

PER HOUR

A

B

C

D

E

F

RISE

RATING

(INCHES)

OUTLET

(LBS)

PCG6240T403NOV

40

.70

40,000

43

70 GPH

2

20

61-3/4

58

51-1/2

23-1/4

25

3 or 4

157

PCG6250T403NOV

50

.70

40,000

43

81 GPH

2

22

60-5/8

57-1/8

50-1/2

25-1/4

27

3 or 4

171

All dimension in inches.

Recovery capacity based on actual performance tests.

Water Connections – 3/4” on all models.

Not available in LP gas (Propane).

Certified for installations up to 5500 ft. elevations.

		1/2”
		DRAFT HOOD
		T&P VALVE
		A
B	C	D
		GAS VALVE	F
		ON/OFF SWITCH
		DRAIN VALVE	HOT
			CONNECTION

ANODE ROD

COLD

CONNECTION

8”

TOP VIEW

FRONT VIEW

Maximum Hydrostatic Working Pressure: 150 PSI

Flammable Vapor Ignition Resistant Water Heaters

This FVIR design meets the American National Standards Institute standards (ANSI Z21.10.1 - 4.1 CSA Standards) that deal with the accidental or unintended ignition of flammable vapors outside the water heater, such as those emitted by gasoline.

Residential Gas High Efficiency Water Heater Specification

Residential gas water heater(s) shall be models ____________ as manufactured by American Water Heaters, or an approved equal, and shall have a ______ -year tank

warranty and a ______ -year parts warranty, when installed in a residential application. Heater(s) shall have a storage capacity of ______ gallons and shall have a rated

input of __________ BTUs, and shall be designed, tested and listed with CSA International in accordance with the latest edition of ANSI Z21.10.1 - CSA4.1 standard.

Heaters shall meet or exceed the Federal Energy Efficiency Standards effective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of 1992. The interior of the storage tank shall be lined with a Fused Ceramic Shield lining, fused to the tank at 1600° F, forming a corrosion-resistant lining; polymer linings are not acceptable. Each tank shall be furnished with an internal powered anode for cathodic protection. The unit must be equipped with a combination gas control thermostat and non-reset type ECO. A corrosion-resistant drain valve shall be provided on the front of each unit. The tank shall be totally encased in a steel jacket, painted and insulated with a non-CFC foam to reduce standby heat loss. The tank must be design certified for 300 PSI test pressure and 150 working pressure.

	Distributed By:
Order Entry and Sales	Warranty and Service
500 Princeton Road (FEDEX, UPS)	500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030	Johnson City, TN 37601-2030
P.O. Box 4808 (Mailing)	P.O. Box 1597 (Mailing)
Johnson City, TN 37602-4808	Johnson City, TN 37605-1597
(800) 937-1037	(800)	456-9805
FAX (800) 581-7224	FAX (800)	999-5210

NRGSS01010

No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.