American Water Heater NRGSS01110 Residential Gas High Efficiency Power Vent, Codes and Standards

Residential Gas

High Efficiency Power Vent

90% THERMAL EFFICIENCY POWER VENT

CODES AND STANDARDS

•Design-certified by UL (Underwriters Laboratories) according to ANSI Z21.10.3 - CSA 4.3 Standards

•Meets or exceeds the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition ASHRAE/IESNA 90.1

BTU

FIRST HOUR

RECOVERY

DIMENSIONS

GALLONS

DELIVERY

GALLONS

INCHES/CENTIMETERS

SHIPPING

MODEL

INPUT

OR

GALLONS

OR

WEIGHT

NUMBER

PER

LITRES

OR

LITRES

A

B

C

D

E

F

G

H

J

K

LBS/KG

HOUR

LITRES

90°F/50°C RISE

	50	127	92	70-5/8	68-1/4		52	21	9-1/8	12	22	8	15-3/4		27	210
VG6250T76NV	76,000
		481	92	179	173		132	53	23	30	56	20		40	68	95
	189
Inlet and outlet connections: 3/4” male
Circulation loop connections: 3/4” female
		OUTLET (L)				INLET (L)
				T & P VALVE		SIDE OUTLET
														(H)
											ANODE
		(A)						(B)					HOT	COLD		(K)
				(G)							(J)
				DIAMETER			(C)
				SIDE INLET									TOP VIEW
			THERMOSTAT								* INSTALL IN ACCORDANCE WITH LOCAL CODES
					DRAIN
					VALVE		(D)
		(F)					(E)

FRONT VIEW

Residential Gas Water Heater Specification

Residential gas water heater(s) shall be models ____________ as manufactured by American Water Heaters, or an approved equal, and shall have a ______ -year tank

warranty and a ______ -year parts warranty, when installed in a residential application. Heater(s) shall have a storage capacity of ______ gallons and shall have a rated

input of __________ BTUs, and shall be designed, tested and listed with CSA International in accordance with the latest edition of ANSI Z21.10.1 - CSA4.1 standard.

Heaters shall meet or exceed the Federal Energy Efficiency Standards effective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of 1992. The interior of the storage tank shall be lined with a Fused Ceramic Shield lining, fused to the tank at 1600° F, forming a corrosion-resistant lining; polymer linings are not acceptable. Each tank shall be furnished with an internal powered anode for cathodic protection. The unit must be equipped with a combination gas control thermostat and non-reset type ECO. A corrosion-resistant drain valve shall be provided on the front of each unit. The tank shall be totally encased in a steel jacket, painted and insulated with a non-CFC foam to reduce standby heat loss. The tank must be design certified for 300 PSI test pressure and 150 working pressure.

	Distributed By:
Order Entry and Sales	Warranty and Service
500 Princeton Road (FEDEX, UPS)	500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030	Johnson City, TN 37601-2030
P.O. Box 4808 (Mailing)	P.O. Box 1597 (Mailing)
Johnson City, TN 37602-4808	Johnson City, TN 37605-1597
(800) 937-1037	(800)	456-9805
FAX (800) 581-7224	FAX (800)	999-5210

NRGSS01110

No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.