Using Your XL-30 (Continued)

CAUTION: Repeated incremental exposure to amplification levels greater than18 dB may be harmful to individuals without hearing disabilities. Therefore, do not remove the warning label attached to the back of the handset. If it is likely that a visually impaired person will use the telephone, securely attach the provided warning printed in Braille to the back of the handset (See, Diagram A).

C A U T I O N

U S E W I T H

VOLUME

LOUD

Diagram A.

NOTE: In standard use, the amplifier turns off whenever you hang up the telephone. This is a useful feature if many people use the phone. If you want the amplifier to always remain on, slide the Volume Reset Override switch on the bottom of the phone to ON, as shown in Figure 10.

- OFF

- ON

Volume

Reset

Override

Figure 10 - Volume Reset Override On/Off

Incoming Voice Tone

The XL-30 provides extra amplification at the sound frequency you need to boost. To identify the sound frequency range that best suits your needs, follow these steps:

1.When you hear a voice on the line, press the AMPLIFY button shown in Figure 8.

2.Adjust the TONE slide control in Figure 11 to suit your hearing.

HOLD*PROG

0

 

#

FLASH

REDIAL

TONE

AMPLIFY

 

VOL

 

 

LO

HI

 

 

Figure 11 - Tone Slide Control

7

Page 13
Image 13
Ameriphone 30 manual Volume Reset Override On/Off