DRY TRASH REMOVAL SYSTEMS
Features |
HORIZONTAL DRY TRASH
REMOVAL SYSTEM
This unit is designed to raise the plastic cases into an upright position, where a fan will blow the dry trash from the cases into a stainless steel mobile catch basket. The cases are then lowered back into their original position.
The unit is comprised of a stainless steel frame assembly containing a “rough top” belt, which transports the cases through the system, maintaining separation whilst they are raised and lowered by specially designed stainless steel guide rails.
The drive shaft is equipped with a torque limiter that will disengage in the event of a belt jam.
The system is supplied with a Nema 4X electrical enclosure containing motor (2) motor starters, and electrical
The system includes variable speed drive, sprockets, guards, etc. and is completely factory wired and tested. The system also incorporates an alarm package which includes infeed and discharge photo cells. This infeed photo cell detects more than one container entering the system. The discharge photo cell detects a jam due to damaged containers.
Features |
Features |
VACCUM DRY TRASH REMOVAL SYSTEM
The Vacuum Dry Trash Removal System is completed with a stainless steel conveying system, mechanical variable speed drive, and a T.E.F.C. motor.
The drive shaft is equipped with a mechanical clutch, that will disengage in the event of a jam. When the clutch is disengaged, a limit switch is energized, which illuminates a light on a control panel and activates the alarm system, thus indicating the jam condition and preventing damage to the baskets.
The baskets are separated as they are transported through this system. The baskets pass through a stainless steel duct arrangement (ducts are located on top and bottom of the basket) where air is directed underneath the baskets blowing the dry trash into the canister, where the dry trash is filtered. The trash then falls into a plastic catch bin located at the bottom of the stainless steel canister.
The system can be either located directly in front of the washing and drying system or supplied as a remote independent system. When the system is located directly in front of the washing and drying system, the electrical controls can be mounted in the main electrical panel. When the system is remote, it is complete with an independent Nema 4X electrical control panel.
Printed in
Canada
“S” STYLE DRY TRASH DUMP REMOVAL SYSTEM
The unit is manufactured from stainless steel, and designed to invert the baskets
The dry trash system is completed with photoeyes which control the baskets throughout the system and is
For more information please call
your Account Manager or 1-800-BAKERS-1.
Headquarters |
|
| |
AMF Bakery Systems | European operation |
| |
2115 West Laburnum Avenue | West Park Ring Road |
| |
Richmond, Virginia 23227 | Leeds LS16 6QQ England |
| |
Tel.: | |||
FAX: | Fax: | ||
|
www.amfbakery.com sales@amfbakery.com
AMF’s continuing engineering is constantly improving product performance. Consequently machinery specifications are subject to change without notice.
08/2001
