HORIZONTAL DIVERTER

Heavy Duty Select-O-Flow Horizontal Diverter – Pans, Lids and Trays

Our Heavy-Duty Select-O-Flow Horizontal Diverter is used to divert Pans, Lids, Trays or Baskets from one conveyor line into two or three juxtaposed (same horizontal plane) receiving lines. This type of diverter is used in pan, lid or basket return conveyor lines, for high speed line selection (Up to 35 actions/min).

The switch consist of a conveyor made out of two (2) strands of roller chain (ASA 80), transversal rods

(1” diam.) on which plastic slats slides from one side to the other. The switching is done by a metallic finger pneumatically actuated which direct the slats into a guiding track.

Standard Configuration 1 in – 2 out and 1 in – 3 out, configuration specific to your layout also available.

Stand alone or system integrated unit.

Anodized aluminum side frames, steel-it painted frame, steel cross members, stainless steel sliding rods

and zinc plated steel hardware.

Switch is equipped with 1/4” FRL, high Cv pneumatic valves and quick exhaust mufflers for dependable high speed switching.

Swing Arm Type Horizontal Diverter

Our Swing Arm Type Horizontal Diverter is used to divert Pans, Lids, Trays or Baskets from one Conveyor Line into two juxtaposed (same horizontal plane) receiving lines. This type diverter is used for moderate speed switching from one line to the other (Up to 15 actions/min).

The switch consist in a Flat Top Conveyor with a pivoting arm mounted above its carrying surface.

Standard configuration (1 in - 2 out), configuration specific to your layout also available.

Stand alone or system integrated unit.

Intralox, Series 900, Flat Top Belt.

Anodized aluminum side frames, steel-it painted cross members, zinc plated steel hardware and black oxided shafts.

Switch is equipped with 3/8” FRL and high Cv pneumatic valves for dependable switching speed and shut-off valve for safety.

Pivoting Conveyor Horizontal Diverter

Our Pivoting Conveyor Horizontal Diverter is used to divert Pans, Lids, Trays or Baskets from one conveyor line into two juxtaposed (same horizontal plane) receiving lines. This type of diverter is used for some relatively moderate speed switching from one line to the other (Up to 15 actions/min).

The switch consist in three conveyors mounted on a single rigid frame. One conveyor is pivoting around a vertical axis (from one side to the other), the two receiving conveyors are fixed.

Standard configuration (1 in - 2 out), configuration specific to your layout also available.

Stand alone or system integrated unit.

Intralox, Series 1100, Friction Top and Flat Top Beltings

Anodized aluminum side frames, steel-it painted cross members and frame, zinc plated steel hardware.

Switch is equipped with 3/8” FRL and high Cv pneumatic valves for dependable switching speed and shut-off valve for safety.

Page 3
Image 3
AMF Switches and Diverters manual Swing Arm Type Horizontal Diverter, Pivoting Conveyor Horizontal Diverter