TILT BOWL MIXER
MECHANICAL SPECIFICATIONS
Frame Assembly
•The exterior of the mixer is entirely covered with polished stainless steel and mounted on a rigid steel frame treated with a stainless steel epoxy paint
•Rigid stainless steel bumper guards
•Lift lugs
•
Bowl and Cooling Jacket
•The bowl is tilted to 120 degrees towards the front
•Stainless steel bowl and jacket totally redesigned for high efficiency (Glycol cooling)
•Bowl insulated with urethane foam covered with a welded stainless steel sheet
•Bowl rests on Nylatron bushings
•Bowl tested at 150 PSI
•Glycol manual hand valves are included
•Refrigeration hoses are included
Agitator and Drive Assembly
•Solid stainless steel Y type spiders split at main shaft and agitator bars
•Stainless steel primary and secondary agitator bars mounted on lubrication free UHMW bushings
•Main shaft seals are easily removable and fabricated of polyethylene for exceptional durability. This new type of seal allows easy cleaning.
•Solid stainless steel breaker bar (adjustable four positions)
•Heavy duty stainless steel main shaft
•Single end belt drive with integral gearhead motor mounted on adjustable base eliminates binder
•Main motor can be replaced from the back or the drive side (depending on option)
•Standard agitator RPM: 35/70 (other RPM's are available as options)
•Manual central lubrication system
Top Assembly
•12" (305 mm) O.D. butterfly or sliding flour gate
•Two stainless steel liquid inlets
•Canopy scraper
•Flour vent
Tilting Assemblies
•Hydraulic tilt on all models include:
-Hydraulic unit with manual
-Hydraulic cylinder
Mechanical Overtilt Options
Agitator Drive Side
Mixer Top Canopy With Multiple | Sanitary Main Shaft Seal | Hydraulic Tilt Mechanism Side |
Flour Inlets and Sponge Door |
|
|
