Ampeg B1RE manual Some Suggested Settings, Rack Mounting

B1RE Bass Amplifier

Some Suggested Settings
	The setting of the Gain control depends on your particular instrument. The
	Master should be set to produce the appropriate output volume level. The
	Graphic EQ can be used to tailor the amplifier to your speaker cabinets, to
	compensate for room acoustics and to “fine tune” your sound.
ROCK:

GAIN	BASS	ULTRA TREBLE MASTER
		MID
PAD

-12dB PEAK

JAZZ:

GAIN	BASS	ULTRA TREBLE MASTER
		MID

PAD

-12dB PEAK

COUNTRY:

GAIN	BASS	ULTRA TREBLE MASTER
		MID

PAD

-12dB PEAK

FUNK “POPPING:”

GAIN	BASS	ULTRA TREBLE MASTER
		MID

PAD

-12dB PEAK

Rack Mounting:

When mounting the B1RE into a rack, the four bottom feet should be removed to maintain the two rack space height of the amplifier. Be sure to keep the feet and their attachment bolts for future use. If the feet are reinstalled, never use screws which will protrude farther into the amplifier than the original hardware.

The rack must be a high quality enclosure capable of securely supporting the weight of the amplifier. Tighten the mounting screws securely through the amplifier’s face plate, into the rack rails. Check the rack and mounting screws occasionally to ensure a continual- ly safe and secure installation.

6