B500DR Programmable Bass Amplifier
Technical Specifications
OUTPUT POWER RATING |
| 500 Watts @ 2 Ohms |
|
| 350 Watts @ 4 Ohms |
|
|
|
TONE CONTROL RANGE | Bass: | 16dB range @ 50Hz |
| Ultra Mid: | +6dB @ 600Hz, |
| Treble: | 31dB range @ 5kHz |
| Ultra High: | +8dB @ 10kHz |
| Ultra Low: | +7dB @ 40Hz |
|
|
|
SIGNAL TO NOISE RATIO |
| 75dB typical |
|
|
|
POWER REQUIREMENTS |
| 120VAC, 60Hz, 545VA |
|
| |
|
| |
|
|
|
SIZE AND WEIGHT |
| 19”W x 3.8”H (with feet) x 15.5”D; 32 lbs |
|
|
|
System Block Diagram
POST
BALANCED
LINE OUT
PRE LEVEL
PEAK LED
POWER
AMP IN
LIMIT |
1+
INPUT
1
MASTER
PREAMP | POWER | LED | |
AMP | PROTECTION | ||
OUT | RELAY | ||
|
1-
SPEAKON® JACK
INPUT
2
GAIN
FX BLEND
BASS | ULTRA MID | TREBLE |
EFFECTS RETURN
EFFECTS SEND
| THERMAL |
| SHUTDOWN, |
| LOW VOLTAGE, |
COOLING | DC PROTECT |
LIMIT | |
FAN | DEFEAT |
SPEAKER OUTPUT
SPEAKER OUTPUT
INPUT PAD | ULTRA LOW ULTRA HIGH |
Ampeg reserves the right to change specifications without notice.
| Declaration of Conformity |
Manufacturer’s Name: | SLM Electronics |
Corporate Headquarters: | 1901 Congressional Drive, St. Louis, Missouri 63146 |
Primary Production Facility: | 700 Hwy 202 W, Yellville, Arkansas, 72687 |
Product Type: | Audio Amplifier |
Products meet the regulations for compliance marking under:
ETL standards UL6500, UL60065, or UL813
CSA standards E60065 or C22.2
CE safety standard EN60065
CE EMC standards EN55103 or EN55013 and EN61000
FCC standards 47CFR 15.107 and 15.109 Class A
KETI standard K60065 (limited model approval)
Compliance Support Contact: SLM Electronics, Attn: R&D Compliance Engineer
1901 Congressional Drive, St Louis, Missouri, 63146 • Tel.:
www.ampeg.com
Made with Pride in the U.S.A. by Ampeg • ©2004 Ampeg, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
P/N
